Troubleshooting With Bluetooth Adaptor - Plantronics BackBeat 903 User Manual

Troubleshooting with Bluetooth Adaptor

I cannot hear music from my
other audio source while the
headphones are also paired
to my Bluetooth A2DP
mobile phone.
I cannot tell if my Bluetooth
adaptor is powered on.
I cannot complete pairing with
another Bluetooth device.
If you connect your mobile phone to your headphones before
connecting your Bluetooth adaptor to your headphones, your mobile
phone's A2DP Bluetooth profile may interfere with the functioning of
the adaptor. Additionally, if you power off the adaptor or move out of
Bluetooth range (10 meters/33 feet), you may lose the connection to
your headphones. In either situation, you will need to:
1 Disconnect—but do not delete—your headphones from your mobile
phone's list of paired devices (see your mobile phone's Bluetooth
manager).
2 Reconnect your headphones to your adaptor.
Reconnect your headphones to your mobile phone
3
(see your phone's Bluetooth manager).
When powered on, the LED on the adaptor flashes blue every 5
seconds. To power on the adaptor, press and hold the power button
for 2 seconds until the LED flashes blue.
Your Bluetooth adaptor must be powered off when pairing a device to
your headphones. See page 5.
[BackBeat 906 only]
16