Advertisement
Field
BG Protection
Mode
Beacon
Interval
Data Beacon
Rate (DTIM)
Fragment
Threshold
RTS
Threshold
TX Power
Short
Preamble
Short Slot
Tx Burst
Pkt_Aggregate Pkt_Aggregate can aggregate multiple data packets
Country Code
Wi-Fi Multimedia
The parameters of WMM are described as follows:
Field
WMM
Enable or disable WMM. After enabling WMM, AP can
Capable
process different types of wireless data according to
their priority levels.
APSD
Enable or disable APSD. After enabling APSD, it can
Capable
decrease the consumption of the power supply device.
DLS
Enable or disable DLS
Capable
WMM
Click the WMM Configuration button to display WMM
Parameters
parameters configuration page.
You may select On, Off, or Auto. The default BG
protection mode is Auto.
By default, wireless beacon signal sends data to
station every other 100 ms. The range is 20~999.
The default DTIM is 1ms. The range is 1~255.
The default fragment threshold is 2346. The range is
256~2346.
The default RTS threshold is 2347.The range is
1~2347.
Set the Tx power. 100% indicates full power.
Enable or disable short preamble. The default setting
is Disable.
Preamble defines the length of CRC correction block
for wireless devices. Short preamble adopts 56-bit
synchronization field. The network whose network
stream is dense should use shorter preambles.
Short Preamble is mainly applied to improvement the
efficiency of real- time applications, such as streaming
video, and Voice-Over-IP telephony.
Enable or disable short slot.
Tx Burst can be used to improve the efficiency of data
transmission. It can make system transmit more data
during a period of time.
together for improving the transmission efficiency
Select a proper country code in the drop down list.
32
Description
Description
Advertisement
