Advertisement
Field
Name
(SSID)
Multiple
SSID1~7
Broadcast
Network
Name
(SSID)
AP
Isolation
MBSSID
AP
Isolation
BSSID
Frequency
(Channel)
Wireless Distribution System (WDS)
WDS modes include Lazy Mode, Bridge Mode, and Repeater Mode. You can
also enable WDS.
1) Lazy Mode
In the lazy mode, AP automatically connects to the WDS devices that use the
same SSID, channel, encryption mode, and the physical mode. You do not
need to manually enter other MAC addresses of peer APs.
The parameters of Lazy Mode are described as follows:
Field
Description
WDS
Select the Lazy Mode in the drop down list.
Mode
Phy
The physical modes in the drop down list include CCK,
Mode
OFDM, HTMIX, and GREENFIELD.
Encryp
The encryption types you can select include NONE, WEP,
Type
TKIP, and AES. If selecting WEP, TKIP, or AES, you need
to set the encryption key.
Encryp
Set the encryption key.
Key
Description
characters. The legal characters include letter, number
underline or the combination of these characters.
Accessional network SSID. Each SSID can use wireless
security setting independently.
Whether to broadcast SSID. After enabling this function,
AP will broadcast its SSID.
Enable or disable the isolation among AP clients. After
enabling this function, the client terminals that connect to
the same AP can not communicate each other.
Enable or disable the isolation among different SSIDs.
After enabling this function, the client terminals with
different SSIDs can not communicate each other.
The MAC address of the wireless interface.
You may select a proper channel in the drop down list.
The default channel is Channel 6.
24
Advertisement
