Table of Contents
Advertisement
2
Transfer and print images
You can use your dock to transfer images to a computer and to print them directly to a
printer.
Transferring images to a computer
The way you transfer images may vary somewhat depending on the following factors.
●
Windows or Mac computer
●
Version of the operating system
●
Whether or not the HP Photosmart Software is installed
●
Whether the camera's
Drive. Refer to your camera electronic User Guide for more information.
1.
Connect the dock to the computer using the USB cable.
2.
Place the camera in the dock and turn it on.
3.
Press either the
4.
Follow the directions on your computer screen. Refer to the on-screen help for
more information.
Printing images
1.
Connect the dock to the printer's PictBridge
printer).
2.
Set the camera's
electronic User Guide).
3.
Insert the camera into the camera dock and turn on the camera.
The
Print Setup
print in the camera, the number of images selected will be shown in the
Setup
4.
If all the settings in the
button on the camera to begin printing. Or, you can change settings in the
Setup
printing.
5.
When the printing completes, you can leave the camera in the dock to recharge
the camera battery.
6
Note
If you are using Windows 98 or Me, you must install the HP
Photosmart Software to transfer images.
USB Configuration
on the dock or the
USB Configuration
menu displays on the camera. If you already selected images to
menu. Otherwise,
Images: ALL
Print Setup
menu using the arrow keys on the camera, then press
is set to
Digital Camera
OK
button on the remote.
port (usually on the front of the
setting to
Digital Camera
will be displayed.
menu look correct, press the
HP Photosmart 6221 Premium Camera Dock
or
Disk
(see the camera
Print
Menu/OK
Print
Menu/OK
to begin
Advertisement
Table of Contents
