Battery Charge Times; Battery Safety Precautions - HP Photosmart 6221 User Manual

Premium camera dock
Hide thumbs


Table of Contents
Chapter 4

Battery charge times

It takes 4 to 6 hours to charge the battery (depending on the camera model). The power light on
the dock turns On when the battery is charged.

Battery safety precautions

Follow these instructions to safely use your batteries.
Using batteries
Do not disassemble or modify the battery. The battery contains safety and protection
devices, which, if damaged, may cause the battery to generate heat, explode, or ignite.
Immediately discontinue use of the battery if, while using, charging, or storing the battery,
the battery emits an unusual smell, feels unusually hot, changes color or shape, or appears
abnormal in any other way.
In the event the battery leaks and the fluid gets into one's eye, do not rub the eye. Rinse
well with water and immediately seek medical care. If left untreated, the battery fluid could
cause damage to the eye.
Do not expose the battery to water or salt water, or allow the battery to get wet.
Do not place the battery in fire or heat the battery.
Do not connect the positive terminal and the negative terminal of the battery to each other
with any metal object (such as wire).
Do not carry or store the battery together with necklaces, hairpins, or other metal objects.
Do not pierce the battery with nails, strike the battery with a hammer, step on the battery, or
otherwise subject it to strong impacts or shocks.
Do not solder directly onto the battery.
Ion battery. This is normal.
A Lithium Ion battery can be left in the camera for any period of time without harm to the
battery or the camera. However, do not store the battery in the camera if it is not
necessary. Always store charged batteries in a cool location.
Recharging batteries
You can recharge both Lithium Ion and NiMH batteries in your dock.
Use the camera and the dock in a dry location only.
Do not charge a battery in a hot location, such as near a fire or in direct sunlight.
When recharging a battery, do not cover the camera or the dock in any way.
Do not operate the camera or the dock if it appears damaged in any way.
Do not disassemble the camera or the dock.
Unplug the HP AC power adapter from the electrical outlet before cleaning.
Possible cause
The HP Photosmart Software
is not installed on your
The camera and the dock may be warm while operating and charging a Lithium
is connecting the dock to the
computer. If it works, then the
problem is not the cable. If it
does not work, try using a
different USB cable.
Refer to your camera
electronic User Guide for
installation instructions.
HP Photosmart 6221 Premium Camera Dock


Table of Contents

  Also See for HP Photosmart 6221

  Related Manuals for HP Photosmart 6221

Table of Contents