Access Gateway Module (Ws-X4604-Gwy); Switching Module Leds - Cisco Catalyst 4500 series Overview

Chapter 1 Module Overview and Specifications
Figure 1-39 WS-X4019 Backplane Channel Module
Note

Access Gateway Module (WS-X4604-GWY)

Switching Module LEDs

78-13267-06
Specification
Connector type
Cable type
The backplane channel module is supported by only the WS-X4013 supervisor
engine in the Catalyst 4006, 4503, or 4506 switches using the Catalyst Operating
System.
The Access Gateway Module is described in the
Module Installation and Configuration Note
Each switching module has one LED labeled STATUS that provides information
about the module and one numbered LED labeled LINK for each port on the
module. Figure 1-40 shows the Gigabit Ethernet port and status LEDs.
Figure 1-41 shows the 10/100BASE-T port LEDs.
switching module LEDs.
Description
–
–
(DOC-7810818).
Catalyst 4500 Series Module Installation Guide
Switching Module LEDs
Catalyst 4000 Access Gateway
Table 1-3 describes the
1-43