Ws-X4412-2Gb-T - Cisco Catalyst 4500 series Overview

Chapter 1 Module Overview and Specifications

WS-X4412-2GB-T

Figure 1-30 WS-X4412-2GB-T 14-Port Gigabit Ethernet Switching Module
Note
78-13267-06
The WS-X4412-2GB-T 14-port Gigabit Ethernet switching module (see
Figure 1-30) has the following specifications:
Specification
Module type
Port duplex mode
Port speed
Number of ports
Connector type
Cable type
1. See the "Installing, Removing, and Maintaining GBICs" section on page 2-8
information.
Some Gigabit Ethernet ports on the WS-X4412-2GB-T switching module are
oversubscribed. For additional information on these ports, see the
Gigabit Ethernet Ports" section on page
You must use Category 5 cables when connecting to the 1000BASE-T ports on
this switching module.
Description
1000BASE-T plus 1000BASE-X Gigabit Ethernet
switching module
Full duplex mode
1000 Mbps
12 1000BASE-T ports
2 optional 1000BASE-X
RJ-45 for the 12 1000BASE-T ports (See
on page 2-2.)
SC-type for the 2 1000BASE-X ports
Figure 2-16 on page 2-18.)
Category 5 UTP (1000BASE-T)
MMF or SMF (1000BASE-X)
3-9.
Catalyst 4500 Series Module Installation Guide
Gigabit Ethernet Switching Modules
1
uplink ports
Figure 2-1
1
(See
for GBIC support
"Configuring
1-33