Making Conference Calls - Cisco 7960G Phone Manual

Making Conference Calls

Your Cisco Unified IP Phone allows you to conference two additional participants into one telephone
conversation, creating a conference call.
If you want to...
• Create a conference by
calling participants
• Add new participants to
an existing conference
Participate in a conference
End your participation in a
conference
Tips
• Calls must be on the same line before you can add them to a conference. If calls are on different
lines, transfer them to a single line before using Confrn.
• Depending on how your phone is configured, if you leave a conference after creating it, the
conference might end. To avoid this, transfer the conference before hanging up.
Cisco Unified IP Phone 7960G and 7940G for Cisco Unified CallManager 5.0 (SIP)
Then...
1. From a connected call, press Confrn. (You may need to press the
more softkey to see Confrn.)
2. Enter the participant's phone number.
3. Wait for the call to connect.
4. Press Join to add the other participant to your call.
Answer the phone when it rings.
Hang up or press EndCall.
Basic Call Handling
27