Declaration Of Conformity For Rf Exposure - Cisco Aironet 340 Series Hardware Installation Manual

Appendix B Declarations of Conformity and Regulatory Information
The Declaration of Conformity related to this product can be found at the following URL:
http://www.ciscofax.com
For the 340 series, the following standards were applied:
•
•
•
The following CE mark is affixed to the 340 series equipment:
For the 350 series, the following standards were applied:
•
•
•
The following CE mark is affixed to the 350 series equipment:
The above CE mark is required as of April 8, 2000 but might change in the future
This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to
Note
certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate
Compliance.
Combinations of power levels and antennas resulting in a radiated power level of above 100 mW eirp are
Note
considered as not compliant with the above mentioned directive and are not allowed for use within the
European community and countries that have adopted the European R&TTE directive 1999/5/EC and/or
the CEPT recommendation Rec 70.03. For more details on legal combinations of power levels and
antennas, contact Cisco Corporate Compliance.

Declaration of Conformity for RF Exposure

The radio module has been evaluated under FCC Bulletin OET 65C and found compliant to the
requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure
from radio frequency devices.
OL-0738-02
Radio: ETS 300.328
EMC: ETS 300.826
Safety: EN 60950
Radio: EN 300.328-1, EN 300.328-2
EMC: EN 301 489-1, EN 301 489-17
Safety: EN 60950
Declaration of Conformity for RF Exposure
Cisco Aironet Access Point Hardware Installation Guide
B-5