Problems Relating To Images; No Images Appear - Epson EB-X14 User Manual

Problem Solving

Problems Relating to Images

No images appear

Check
Did you press the [t] button?
Are the indicators switched off?
Is A/V Mute active?
Is the A/V mute slide closed?
Are the Configuration menu settings correct?
Is the image to be projected completely black?
(Only when projecting computer images)
Is the image signal format setting correct?
(Only when projecting images from a video source)
Is the USB cable connected correctly?
(Only when projecting USB Display)
Is Windows Media Center displayed in full screen?
(Only when projecting USB Display)
Is an application using the Windows DirectX function displayed?
(Only when projecting USB Display)
Press the [t] button to turn the power on.
The power cable is not connected correctly or power is not being supplied.
Connect the projector's power cable correctly.
s "From Installation to Projection" p.30
Check that your electrical outlet or power source is functioning correctly.
Press the [A/V Mute] button on the remote control to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)"
Open the A/V mute slide.
s "Front/Top" p.10
Reset all of the settings.
s Reset - Reset All p.73
Some input images, such as screen savers, may be completely black.
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.68
Check that the USB cable is connected correctly. Reconnect it if it is not connected or not connected properly.
When Windows Media Center is displayed at full screen, you cannot project using USB Display. Reduce the screen
size.
Applications using the Windows DirectX function may not display images correctly.
Remedy
p.52
80