Signal Menu - Epson EB-X14 User Manual

List of Functions
Submenu
Color Adjust- (This item cannot be selected if Color Mode is set to sRGB
ment
You can adjust the color strength for Red, Green, and Blue
individually.
(This item can be set only if Color Mode is set to Dynamic or
Auto Iris
Theatre.)
Set to On to adjust the iris to obtain the optimum light for images
being projected.
The setting is stored for each Color Mode.
s "Setting Auto Iris"
You can reset all adjustment values for the Image menu to their
Reset
default settings. See the following to return all menu items to
their default settings.
s "Reset Menu"

Signal Menu

Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
You cannot make settings on the Signal menu when the source is USB
Display or USB.
Function
p.42
p.73
"Automatically Detect Input Signals and Change the Projected Image
s
(Source Search)" p.31
g
.)
Submenu
Auto Setup
Resolution
Tracking
Sync.
Position
Function
Set to On to automatically adjust Tracking, Sync., and Position to
the optimum state when the input signal changes.
Set to Auto to automatically identify the resolution of the input
signal. If images are not projected correctly when set to Auto, for
example if some of the image is missing, adjust to Wide for wide
screens, or set to Normal for 4:3 or 5:4 screens depending on the
connected computer.
You can adjust computer images when vertical stripes appear in
the images.
You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
You can adjust the display position up, down, left, and right when
a part of the image is missing so that the whole image is projected.
68