Download Print this page

To Delete All Manually Saved Data; To Delete Data In A Specifi C Memory Area; Looking Up Sunrise And Sunset Times; To Enter The Sunrise/Sunset Mode - Casio 3414 Operation Manual

Hide thumbs

Advertisement

Table of Contents
Trek Log Values (Mt.1 to Mt.14)
High Altitude Value
Low Altitude Value
*1
*1: Month and day the displayed value was recorded.
*2: Month and day cumulation started.
Holding down A or C scrolls at high speed.
On the high altitude value (MAX) and low altitude value (MIN) screens, the lower display area alternates
between the date (month and day) and time at one-second intervals.
On the cumulative ascent and cumulative descent screens, the lower display area alternates between
the month and day, and the year at one-second intervals.
E-80
4. Hold down E for at least two seconds. First, Clear Hold will fl ash in the display. After that, Hold will
disappear. Release E when Hold disappears.
If you are deleting a Manually Saved Record Area record, holding down E too long (after Hold
disappears) will cause all manually saved records to be deleted.
Deleting a record in either the Manually Saved Record Area or Trek Log Value Area will cause all
records following it to be shifted upwards and renumbered accordingly. If the record you delete
is the last one currently in the memory area where you deleted it, - - - - will be displayed in the
display in place of the record number.
After you delete Auto Save Values, the MAX (high altitude) and MIN (low altitude) values will show
- - - -, while the ASC (cumulative ascent) and DSC (cumulative descent) values will show zero.
E-82

To view the sunrise/sunset time for a particular date

1. Enter the Sunrise/Sunset Mode.
Date
Date
This will display the sunrise and sunset times for the current
date at the location specifi ed by the city code, latitude, and
longitude.
2. While the sunrise/sunset time are on the display, use A (+) and C (–)
to scroll through the dates.
Pressing one of the above buttons causes the month and day to
appear in the upper display area, and the year to appear in the
lower display area.
When you release the button, the sunrise time of the selected day
will be shown in the middle display, while the sunset time will be
shown in the lower display.
Sunset time
Sunset time
Sunrise time
Sunrise time
You can select any date between January 1, 2000 and December
31, 2099.
Note
If you think that the sunrise and/or sunset times are not correct for
some reason, check the watch's city code, longitude and latitude
settings.
The sunrise and sunset times displayed by this watch are times at
sea level. Sunrise and sunset times are different at altitudes other
than sea level.
E-84
3. Press E to display the longitude/latitude setting screen, with the
Latitude
Latitude
latitude setting fl ashing.
4. Use D to move the fl ashing between the latitude and the longitude
setting.
5. Use A (+) and C (–) to change the fl ashing setting.
You can configure the longitude and latitude setting within
following ranges.
Latitude Range: 65.0°S (South 65.0 degrees) to 0°N to 65.0°N
(North 65.0 degrees)
Longitude Range: 179.9°W (West 179.9 degrees) to 0°E to 180.0°E
(East 180.0 degrees)
Latitude and longitude values are rounded off to the nearest
Press D.
Press D.
degree.
6. Press E to return to the Timekeeping Mode.
7. In the Timekeeping Mode, press D.
Display the location whose sunrise and sunset times you want to
view.
Longitude
Longitude
E-86
Operation Guide 3414
Cumulative Ascent
Cumulative Descent
Value
Value
*2

To delete all manually saved data

Memory contents cannot be deleted while trek log values are being recorded.
1. Use D to enter the Data Recall Mode.
2. Use B to display the Manually Saved Record Area (page E-77).
3. Hold down E for at least three seconds. First, Clear Hold ALL will fl ash in the display. After that, Hold
will disappear. Release E when Hold disappears.
This will cause - - - - to appear in the lower display.
This indicates that all manually saved data is cleared.
To delete data in a specifi c memory area
Memory contents cannot be deleted while trek log values are being recorded.
1. Use D to enter the Data Recall Mode.
2. Use B to display the memory area (Manually Saved Record Area, Auto Save Value Area, or Trek Log
Value Area) that contains the data you want to delete.
3. What you should do next depends on which memory area you displayed in step 2, above.
If you displayed the Manually Saved Record Area, use A and C to display the number of the
record (REC-01- through REC-30-) you want to delete.
If you displayed the Auto Save Value Area, all of its values will be deleted, so you do not need to
select anything.
If you displayed the Trek Log Value Area, use B to display the trek (mountain) number of the
record (Mt.1 through Mt.14) you want to delete.
Important!
A delete operation cannot be undone! Make sure you do not need data before you delete it.

Looking up Sunrise and Sunset Times

You can use the Sunrise/Sunset Mode to look up the sunrise and sunset times for a particular date (year,
month, day) and location.
Current date
Current date

To enter the Sunrise/Sunset Mode

While in the Timekeeping Mode, press D to enter the Sunrise/Sunset
Mode.
This will display the sunrise and sunset times for the current date
based the currently specifi ed city code, latitude, and longitude.
Sunrise/sunset times will not be displayed when battery power is low.
Before trying to use the Sunrise/Sunset Mode, you need to confi gure
settings for the city code, longitude, and latitude for the location whose
sunrise and sunset times you want to view.
The factory default confi guration of the location is: City Code: TYO
(Tokyo); Latitude: North 35.7 degrees; Longitude: East 139.7 degrees.
Sunset time
Sunset time
Sunrise time
Sunrise time
To look up the sunrise and sunset times for a specifi c location
Important!
You do not need to perform this procedure to look up the sunrise and sunset times in your currently
selected Home City.
If you select a different city code to look up the sunrise and sunset times there, return to the city
code of your Home City (your current location) when you are fi nished. Otherwise, the time shown
in the Timekeeping Mode will not be correct.
For information about the Home City setting, see "Confi guring Home City Settings" (page E-28).
1. In the Timekeeping Mode, hold down E for at least two seconds. First, SET Hold will fl ash on the
display, and CITY will be displayed in the upper display. After that, the currently selected city code and
city name will scroll across the upper display. Keep E depressed until the scrolling starts.
2. Use A (East) and C (West) to select the city code whose sunrise and sunset times you want to view.
For details about city codes, see the "City Code Table" at the back of this manual.
If this display shows the information you need, you can exit this procedure at this point by pressing
E twice. If you want to specify a latitude and longitude for a more exact reading, advance to step 3,
below.

Using the Stopwatch

The stopwatch measures elapsed time, split times, and two fi nishes.
Hours
Hours

To enter the Stopwatch Mode

Use D to select the Stopwatch Mode (STW) as shown on page E-24.

To perform an elapsed time operation

A
Start

To pause at a split time

A
Current time
Current time
Start
Minutes
Minutes
Seconds
Seconds
1/10 second
1/10 second
A
A
A
Stop
(Restart)
(Stop)
C
A
C
Split
Split release
Stop
(SPLIT appears
in the upper part
of the display.)
E-81
E-83
E-85
C
Reset
C
Reset
E-87

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3415