To Delete A Specifi C Record; To Delete All Recorded Data; Checking The Tide Level And Moon Ages (Tide/Moon; To View The Current Tide Level And Moon Age - Casio 5480 Operation Manual

Manual Save 1
Year Month Record name
Hour : Minutes
Day
2 seconds
2 seconds
Altitude
Cumulative
Descent (DSC)
Cumulative recording start
date (year, month, day)
2 seconds
Cumulative descent
E-88
To delete a specifi c record
1. Use B to enter the Data Recall Mode.
2. Use A and C to display the record you want to delete.
Important!
Note that holding down D for more than fi ve seconds in step 3 will delete all data.
•
• A delete operation cannot be undone! Make sure you do not need data before you delete it.
3. Hold down D. Keep D depressed when CLEAR starts to fl ash on the display, and release it as soon
as CLEAR stops fl ashing (and remains displayed).
• Deleting a record in the manually saved record memory area causes all of the records following it
to be shifted upwards and renumbered accordingly.

To delete all recorded data

1. Use B to enter the Data Recall Mode.
2. Hold down D for at least three seconds. Keep D depressed when CLEAR ALL starts to fl ash on the
display, and release it when CLEAR ALL stops fl ashing (and remains displayed).
• - : - - and -.- - will alternate on the display.
E-90
1. Use B to select the Tide/Moon Data Mode as shown on page E-32.
• TIDE will appear on the display. After about one second, the current date will be displayed. Tide
Graph will show the tide level at 6 a.m. today. After about two seconds, this will start to alternate
with the tide level at 6 a.m. today.
Tide level at 6:00 a.m.
for today
• If you are using 12-hour timekeeping, the P (p.m.) and A (a.m.) indicators will also appear on the
display.
2. Use A (+1 hour) and C (–1 hour) to specify the time you want.
• The Tide Graph changes in accordance with the time setting.
Holding down A or C scrolls at high speed.
•
E-92
3. Use A or C to specify the date you want.
You can use this screen to check the Moon age on the specifi ed date.
Pressing A or C will cause today's date to appear on the display. After that, you can use A
•
(forward) and C (back) to scroll the date.
Holding down A or C scrolls at high speed.
•
• About two seconds after you display the desired date, the Moon age on that date appears.
• You can select any date between January 1, 2000 and December 31, 2099.
4. Press D.
• You can check the tide at 6:00 a.m. on a specifi ed date.
5. Use A (+1 hour) and C (–1 hour) to specify the time you want.
• The Tide Graph changes in accordance with the time setting.
Holding down A or C scrolls at high speed.
•
E-94
Operation Guide 5480
Manual Save 30 High Altitude (MAX)
2 seconds 2 seconds
2 seconds 2 seconds
Altitude High altitude
Cumulative
Ascent (ASC) Low Altitude (MIN)
Cumulative recording start
date (year, month, day)
2 seconds
2 seconds
2 seconds
Cumulative ascent
Low altitude
• Manually saved records (REC01 to REC30) and auto save MAX and MIN values all include the
date (year, month and day) and time (hour and minute) that the data was recorded.
• The ASC and DSC records include altitude values along with the date (year, month, day) that the
fi rst value was recorded.
• For details about auto save values, see "Auto Save Values" (page E-69).
• - - - - will be displayed if MAX/MIN data has been deleted or if there is no corresponding MAX/MIN
data due to error, etc.
• When the total ascent (ASC) or total descent (DSC) exceeds
99,999 meters (or 327,995 feet), the applicable value will restart
from zero.
1s digit
10,000s digit

Checking the Tide Level and Moon Ages (Tide/Moon)

You can use the watch to check the current tide level and Moon age.
• Current tide level and Moon age information is displayed for the currently selected Home Time City.
You can also check information for another city by changing to a different Home City (page E-36).
• Note that the tide and Moon information displayed by this watch is approximate and is intended as
general information only. Never try to use it for marine navigation or any other purposes requiring
accurate measurements.

To view the current tide level and Moon age

The small hand indicates the tide level.*
* Except in the Compass Mode, Altitude Mode, or Barometer Mode, or
while the crown is pulled out.
In the Tide/Moon Mode, the tide level for a specifi ed date and time is
indicated. See the information starting from page E-92.
• The tide level is indicated as one of six levels.
• The tide in the Home City is indicated even while the watch is in the
World Time Mode.
• If the Tide Graph hand indication is not correct, check the Timekeeping
Mode time and date, and the Home City settings. If this does not
correct the problem, refer to "Calibrating the High Tide Time" (page E-95).
Tide (Tide Graph hand)
3. Press D.
• MOON will appear on the display. After about one second, today's
Moon age will be displayed.
• The Moon age is for noon on the current date, regardless of the
indicated time.
• Calculation error for the Moon age is ±1 day.
Today's Moon age
To view the tide level and Moon age for a specifi c date and time
1. Use B to enter the Tide/Moon Data Mode as shown on page E-32.
2. Press D.
This displays information in the following sequence: MOON ➝ Today's Moon age.
•
Calibrating the High Tide Time
You obtain more accurate tide indications by the watch by calibrating its high tide time with information
you can fi nd on the Internet or in a newspaper.
• Note that the high tide time differs according to your location and the current season.

To calibrate the high tide time

1. Perform steps 1, 2, and 3 under "To view the tide level and Moon age for a specifi c date and time" and
then specify the date whose high tide time you want to calibrate.
2. Pull out the crown.
Hour : Minutes
• This will cause the hour and minute digits of the high tide time to
fl ash.
3. Rotate the crown to change the minute setting.
• The hour setting will change in accordance with minute setting
changes. To set the hour hand separately, go to step 4 of this
procedure.
• Any time during steps 3 through 5, you can discard your changes
and return to the uncalibrated high tide time for the selected date
by pressing A and C at the same time.
• If there are two high tides on a date, set the time of the fi rst high
tide. The watch will automatically calculate the time of the second
one.
• If summer time is turned on for your Home Time (DST displayed),
you should also use summer time when setting the high tide time
(page E-36).
4. Press B.
Today's Moon age
D
Tide level
not indicated
E-89
E-91
E-93
E-95