Viewing Altitude Records; To View Altitude Records; To Delete All Manually Saved Data; To Delete Data In A Specifi C Memory Area - Casio 3444 Operation Manual

Viewing Altitude Records

You can use the Data Recall Mode to view manually saved record data, auto save values, and trek log
values.

To view altitude records

1. Use D to select the Data Recall Mode (REC) as shown on page E-24.
• About one second after REC appears on the display, the display
will change to show the fi rst record of the memory area you were
viewing when you last exited the Data Recall Mode.
2. Use B to select the memory area you want.
REC -01-
Reading date Reading date
(month, day) (month, day)
(Manually Saved
Record Area)
1 second 1 second
After you select the Trek Log Value Area screen, use the B
•
button to select the trek whose values you want to view. Treks are
numbered from 1 (Mt.1) through 14 (Mt.14).
• After you select the Manually Saved Record Area screen, the date
(month and day) and time of the record will alternate on the display
in the lower display at one-second intervals.
Reading time Reading time
(Hour : minute) (Hour : minute)
Manually Saved Manually Saved
Record Area Screen Record Area Screen
E-72
MAX
Altitude Altitude
• Manually saved records (REC01 to REC30), auto save MAX and MIN values, and trek log values
all include the date (month and day) and time (hour and minute) that the data was recorded.
• Records of the ASC and DSC include altitude values along with the date (month, day) and year
that the data was recorded.
• For details about auto save values, see "Auto Save Values" (page E-65). For details about trek log
values, see "Trek Log Values" (page E-66).
• ---- will be displayed if MAX/MIN data has been deleted or if there is no corresponding MAX/MIN
data due to error, etc. In such cases, total ascent (ASC) and total descent (DSC) values will show zero.
• When the total ascent (ASC) or total descent (DSC) exceeds
99,999 meters (or 327,997 feet), the applicable value will restart
from zero. Note that the watch can display up to fi ve digits only.
When using feet as the altitude display units, altitude values are
displayed only up to the rightmost fi ve digits.
• When the total ascent (ASC) or total descent (DSC) value
becomes fi ve digits long, the rightmost (ones) digit is shown in the
lower right of the display. The nearby illustration shows the display
1s digit 1s digit
when the value of ASC is 99995 meters.
10,000s digit 10,000s digit
E-74

To delete all manually saved data

Memory contents cannot be deleted while trek log values are being recorded.
1. Use D to enter the Data Recall Mode.
2. Use B to display the Manually Saved Record Area (page E-72).
3. Hold down E for at least three seconds. First, Clear Hold ALL will fl ash in the display. After that, Hold
will disappear. Release E when Hold disappears.
• This will cause - - - - to appear in the lower display.
• This indicates that all manually saved data is cleared.
To delete data in a specifi c memory area
Memory contents cannot be deleted while trek log values are being recorded.
1. Use D to enter the Data Recall Mode.
2. Use B to display the memory area (Manually Saved Record Area, Auto Save Value Area, or Trek Log
Value Area) that contains the data you want to delete.
3. What you should do next depends on which memory area you displayed in step 2, above.
If you displayed the Manually Saved Record Area, use A and C to display the number of the
•
record (REC-01- through REC-30-) you want to delete.
• If you displayed the Auto Save Value Area, all of its values will be deleted, so you do not need to
select anything.
If you displayed the Trek Log Value Area, use B to display the trek (mountain) number of the
•
record (Mt.1 through Mt.14) you want to delete.
Important!
• A delete operation cannot be undone! Make sure you do not need data before you delete it.
E-76
Looking up Sunrise and Sunset Times
You can use the Sunrise/Sunset Mode to look up the sunrise and sunset times for a particular date (year,
month, day) and location.
Current date Current date

To enter the Sunrise/Sunset Mode

While in the Timekeeping Mode, press D to enter the Sunrise/Sunset
Mode.
• This will display the sunrise and sunset times for the current date
based the currently specifi ed city code, latitude, and longitude.
• Sunrise/sunset times will not be displayed when battery power is low.
• Before trying to use the Sunrise/Sunset Mode, you need to confi gure
settings for the city code, longitude, and latitude for the location whose
sunrise and sunset times you want to view.
• The factory default confi guration of the location is: City Code: TYO
(Tokyo); Latitude: North 35.7 degrees; Longitude: East 139.7 degrees.
Sunset time Sunset time
Sunrise time Sunrise time
E-78
Operation Guide 3444
Total Mt.1
(Auto Save (Trek Log
Value Area) Value Area)
MIN ASC DSC
Trek Log Values (Mt.1 to Mt.14)
3. Use A and C to scroll through the screens for an area and display the one you want.
REC
-01-
Altitude Altitude
MAX
Altitude Altitude
Trek Log Values (Mt.1 to Mt.14)
High Altitude Value Low Altitude Value
*1
*1: Month and day the displayed value was recorded.
*2: Month and day cumulation started.
Holding down A or C scrolls at high speed.
•
• On the high altitude value (MAX) and low altitude value (MIN) screens, the lower display area alternates
between the date (month and day) and time at one-second intervals.
• On the cumulative ascent and cumulative descent screens, the lower display area alternates between
the month and day, and the year at one-second intervals.
4. Hold down E for at least two seconds. First, Clear Hold will fl ash in the display. After that, Hold will
disappear. Release E when Hold disappears.
If you are deleting a Manually Saved Record Area record, holding down E too long (after Hold
•
disappears) will cause all manually saved records to be deleted.
• Deleting a record in either the Manually Saved Record Area or Trek Log Value Area will cause all
records following it to be shifted upwards and renumbered accordingly. If the record you delete
is the last one currently in the memory area where you deleted it, - - - - will be displayed in the
display in place of the record number.
• After you delete Auto Save Values, the MAX (high altitude) and MIN (low altitude) values will show
- - - -, while the ASC (cumulative ascent) and DSC (cumulative descent) values will show zero.

To view the sunrise/sunset time for a particular date

1. Enter the Sunrise/Sunset Mode.
Date Date
• This will display the sunrise and sunset times for the current
date at the location specifi ed by the city code, latitude, and
longitude.
2. While the sunrise/sunset time are on the display, use A (+) and C (–)
to scroll through the dates.
• Pressing one of the above buttons causes the month and day to
appear in the upper display area, and the year to appear in the
lower display area.
• When you release the button, the sunrise time of the selected day
will be shown in the middle display, while the sunset time will be
shown in the lower display.
Sunset time Sunset time Sunrise time Sunrise time
• You can select any date between January 1, 2000 and December
31, 2099.
Note
• If you think that the sunrise and/or sunset times are not correct for
some reason, check the watch's city code, longitude and latitude
settings.
• The sunrise and sunset times displayed by this watch are times at
sea level. Sunrise and sunset times are different at altitudes other
than sea level.
REC REC
-02- -30-
Manually saved records
MIN ASC DSC
Auto saved values
Cumulative Ascent Cumulative Descent
Value Value
*2
E-73
E-75
E-77
E-79