Power Supply; Screw Terminal Block Power Module: Terminal Cover In Place (Hi Module Shown); Screw Terminal Block Power Module: Terminal Cover Removed (Hi Module Shown); Pluggable Terminal Block Power Module (Hip Module Shown) - RuggedCom RuggedBackbone RX1501 Hardware Installation Manual

2. RuggedBackbone™ Modules

2.3. Power Supply

The RX1501 is equipped with a single power module.
A single power module is capable of delivering a maximum of 42W, and accepts either AC or DC
power at its input.
Power modules may be ordered with a screw terminal block or with a pluggable terminal block. The
screw terminal block features a safety cover which must be removed to make wiring connections,
and must be replaced after wiring is complete.
Power modules may be ordered as separate components. Refer to the RX1501 data sheet for
complete ordering details.
Figure 2.25. Screw terminal block power module: terminal cover in place (HI module shown)
Figure 2.26. Screw terminal block power module: terminal cover removed (HI module shown)
Figure 2.27. Pluggable terminal block power module (HIP module shown)
RuggedCom® RuggedBackbone™ 17 RX1501 Installation Guide Rev 104