Setting Up The Phonebook; Creating Phonebook Entries - Uniden WDSS 5335+1 Owner's Manual

Setting Up the Phonebook

Your handset can store up to 70 names and numbers in your phonebook. When all the phonebook entries are full,
you will hear a beep and MEMORY FULL appears. You cannot store any additional names and numbers unless you
delete some of the existing ones.
You can also use the phonebook entries to store a group of numbers (up to 20 digits) that you may need to enter
once your call connects. This is referred to as chain dialing. See Chain Dialing from the Phonebook on page 3.

Creating Phonebook Entries

To store names and numbers in your phonebook, please follow these steps:
) When the phone is in standby mode, press [
2) To create a new phonebook entry, move the cursor to select CREATE NEW,
and press [select/
3) Enter the name for this entry (EDIT NAME).
Use the keypad to enter a name for this entry; the name can contain up to 6 characters. (See Entering Text
from Your Handset on page  for instructions on entering text.) If you do not want to enter a name for this entry,
your phone will store this entry as <NO NAME>. Press [select/
4) Enter the number for this entry (EDIT NUMBER).
Once you have stored a name, EDIT NUMBER appears next. Use the
number keypad to enter the phone number; the phone number can contain
up to 20 digits. If you need the phone to pause between digits when it's
dialing (for example, to enter an extension or an access code), press [redial/
pause] to insert a two-second pause. You will see a
also use more than one pause together if two seconds is not long enough.
Each pause counts as one digit.
]. EDIT NAME appears.
].
] when you are finished.
in the display. You can
24