Using The Intercom - Uniden WDSS 5335+1 Owner's Manual

Multi-handset phone
Hide thumbs Also See for WDSS 5335+1:
Table of Contents

Advertisement

2)
Move the cursor to CALL PRIVACY, and then press [select/
2 seconds;
appears and remains in the display until the feature is turned off.
To turn privacy mode off, repeat the procedure listed above.

Using the Intercom

You can use the intercom to talk to another handset without using the phone line.
Making an Intercom Page
From the handset:
)
With the phone in standby, press [hold/int'com/xfer].
2)
Use [
] or [
] to select the handset you want to talk with, then press [select/
handset.
3)
To cancel the intercom page, press [ ].
Note: Intercom paging will be cancelled if any of the following things occur:
You receive an outside call or an intercom page while selecting the other handset.
You do not select a handset within 30 seconds.
The party does not answer the page within one minute.
The party is busy.
The party is out of range (UNAVAILABLE appears in the display).
Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the handset that is paging.
)
Press [ /flash] or [hold/int'com/xfer]. If AutoTalk is on, the handset will automatically answer the page when
you remove the handset from the cradle.
2)
To hang up an intercom page from the handset, press [ ].
]. PRIVACY MODE ON appears in the display for
39
]. Select ALL to page all other

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wdss 5335+2Wdss 5335

Table of Contents