Registering Wdss 5305 Accessory Handsets - Uniden WDSS 5335+1 Owner's Manual

Registering WDSS 5305 Accessory Handsets

Your phone supports a total of eight (8) cordless handsets. Handset(s) supplied in the box with the phone base are
pre-registered at the factory. If you purchase an accessory handset, you need to register the handset before use.
Only one handset can be registered at a time. When charged, pre-registered handsets display a handset ID number.
Handsets that have not been registered display.
) Before registering the WDSS 5305 accessory handset, the battery pack MUST be charged for 5-20 hours.
2) To register the WDSS 5305 handset:
Place the handset in the telephone base charging cradle to begin registration.
3) During the registration process, HANDSET REGISTERING will appear in the LCD. When REGISTRATION
COMPLETE is displayed, the handset has been registered to the base. If REGISTRATION FAILED appears,
please try these steps again. A handset ID will be automatically assigned when registration is complete.
Note: If an accessory handset has ever been registered to a base, you must reset the handset before you can
register it to a new base. See Resetting Handsets on page 23.
↔
22