Table of Contents
Advertisement
Expanding Your Phone
Adding accessory handsets
Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now
place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle.
•
Your phone is compatible with the following Uniden DECT6.0 accessory handsets: DCX00, DCX300 and
DWX07. (Please visit our website at www.uniden.com for the most up-to-date list of compatible handsets.)
•
If you purchase any accessory handsets separately, you must register the handsets to the base before you can
use them. (Accessory handsets that come packaged with a base are already registered to that base.)
Registering accessory handsets
When charged, registered handsets display a handset ID number. Handsets that have not been registered display:
To register an accessory handset:
1)
Charge the handset completely. (DCX00 and DCX300 handsets need to charge for 15-0 hours. DWX07
handsets need to charge for at least 5 hours.)
)
Disconnect the base AC adapter. Then press and hold Find while you reconnect the adapter. Keep pressing
Find until the charge LED starts to blink.
3)
On the handset, press and hold # until the handset beeps and displays HANDSET REGISTERING.
4)
When the handset has registered to the base, the LCD will display REGISTRATION COMPLETE then show the
handset ID number.
If the display shows REGISTRATION FAILED, repeat the process again.
Note: If a handset has ever been registered to a base, reset the handset before you register it to a new base (see
Resetting the Handset on page 49). Or to use multiple bases, see the next section.
↔
1
Advertisement
Table of Contents
