Call Handling Features; Call Waiting - Lucent Technologies 4412D+ User Manual

Programming and Feature Codes

Call Handling Features

Call Waiting

Camp-On
Drop
HFAI
When Call Waiting is turned on at an extension and you are
already on a call, you hear one tone for inside calls or two tones
for outside calls when a second call arrives at that extension.
To turn on Call Waiting at your extension: lift the handset and
1 1
press
To turn off Call Waiting at your extension: lift the handset and
1 1
press
To pick up a Call Waiting call: hang up and the waiting call rings,
or press
Feature
Camp-On allows you to complete a transfer to a busy extension.
The call is put on hold until the extension can receive a call; then
it rings automatically and you hear a priority ring (1 long ring and
3 short rings).
To use with the feature code:
(or #
Feature
You must program a Drop button onto a button. Use
drop a participant from a conference call.
The display shows 4400-Drop.
To program a Drop button:
+
7
Drop
To use Hands-Free Answer Intercom (HFAI), you must program
an HFAI button onto a button. When you press
talk to a person who calls you on an intercom call without lifting
the receiver.
To program an HFAI button:
# 0 0
+
.
.
#
(or )+ 8 7
To program onto a button:
)+ .
5 7 EXT
+
#
EXT
+
8 7
#
EXT
7 7 9 #
+
.
+ lift handset +
Camp-On
+
0 0
.
+ lift handset + #
.
0 0
HFAI
+ lift handset +
0 0
.
# 0 0
5 7
+
Drop
to
0 0 +
, you can
HFAI
+