Carpet Cleaning; Above Floor Cleaning - Royal Vacuum Cleaner Owner's Manual

HOW TO OPERATE: CONTINUED
IMPORTANT: FOR BEST CLEANING RESULTS USE A STEADY, FORWARD AND BACKWARD MOTION. CLEANING
SHOULD BE DONE AT HALF THE SPEED OF DRY VACUUMING. FOR HEAVILY SOILED AREAS, REPEAT
IF NECESSARY.

CARPET CLEANING

5. 6.
Place bottom of solution reservoir
Plug cord into electrical outlet.
into cleaner and position until the
Step on handle release pedal,
lever snaps into place.
to put unit in cleaning position.
8.
While depressing solution spray trigger, slowly push unit forward. Release
trigger and pull unit backward in the same path to remove dirty water and
solution from carpet. (For heavily soiled areas, repeat if necessary).
IMPORTANT: IF THE SOUND OF THE MOTOR CHANGES TO A HIGH PITCH,
THIS INDICATES THE DIRTY WATER TANK IS FULL AND MUST BE EMPTIED.
ABOVE FLOOR CLEANING/ATTACHMENTS*
1.
2.
Put cleaner in its REMOVE THE DIRTY
upright position. WATER TANK DOOR.
Connect the upholstery
attachment to the
trigger adaptor.
* Not available on all models
7.
Power
ON/OFF
Switch
Turn power switch to the "ON"
position. NOTE: Never leave unit
unattended with power on. Turn OFF
when emptying and filling reservoir.
Do NOT oversaturate the carpet.
3. 4.
4a.
Insert the hose adaptor Connect the base water
into the dirty water tank. supply connector into
the fitting on the lower
left side of handle facing
cleaner (4a).
9