Sharp MD-MX30H Operation Manual page 39

(Continued)
To change disc names and track names
TIMER/DELETE
NAME/TOC EDIT
To delete a character:
(Example: To change "BESUT" to "BEST")
1
To change disc names, perform steps 1 - 3 on page 36.
To change track names, perform steps 1 - 2 on page 37.
2
Press the 3 3 or 2 2 button to flash the character to
3 3 2 2
3 2
erase.
DISC
To cancel the operation, press the MD
3
Press the TIMER/DELETE button.
DISC
After this step, if you are not going to enter a character, go
to step 5.
4
Select the character you want to add, using the jog
dial. Then, press the MEMORY/ENTER button.
The selected character will be added, and the original char-
acters will move to the right by one.
5
After entering all of the characters in the name, press
the NAME/TOC EDIT button.
*36-43
MD
3 2
MEMORY/
ENTER
Jog dial
button.
38
To add a character:
(Example: To change "BET" to "BEST")
1
To change disc names, perform steps 1 - 3 on page 36.
To change track names, perform steps 1 - 2 on page 37.
2
Press the 3 3 or 2 2 button to flash the character at
3 3 3 2 2 2
the place you want to add a letter.
DISC
To cancel the operation, press the MD
3
Select the character you want to add, using the jog
dial. Then, press the MEMORY/ENTER button.
DISC
DISC
The selected character will be added, and the original char-
acters will move to the right by one.
4
After entering all of the characters in the name, press
the NAME/TOC EDIT button.
Note:
You cannot modify disc or track names created on other
equipment if they are over 40 characters.
In this case, erase the name and then enter a new name.
38
00.1.13, 0:03 PM
button.