Sharp MD-MX30H Operation Manual page 25

(Continued)
To recall stations that have been stored in
memory (PTY search)
You can search a desired station by specifying the programme
type (news, sports, traffic programme, etc. ... see pages 19-
20) from among the stations that have been stored in memory.
(ASPM is convenient for storing stations in memory.)
1
4,6
4,6
1
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the FM ST
or FM band.
4
Press the PTY.TI SEARCH (PTY.TI) button.
"PTY TI" and "SELECT" will appear alternately for about 6
seconds.
*23-30
5
2,3
5
2,3
24
5
Within 6 seconds, turn the jog dial or press the PRE-
SET (X X X X X or W W W W W ) button to select the programme type
you want.
Each time the button is pressed, the programme type will
appear. If the button is held down for more than 0.5 sec-
onds, the programme type will appear continuously.
6
Whilst the selected programme type is flashing (within
4 seconds), press the PTY.TI SEARCH (PTY.TI) button
again.
After the name of the selected programme type has been
lit for 2 seconds, "SEARCH" will appear, and the search
operation will start.
Note:
If the display has stopped flashing, start again from step 4.
If the unit finds out a desired programme type you want, cor-
responding channel number will flash for about 3 seconds,
and then the station name will flash for 7 seconds, and then
remains lit.
If you want to listen to the same programmed type of an-
other station, press the PTY.TI SEARCH (PTY.TI) button
whilst the channel number or station name is flashing. The
unit will look for the next station.
Note:
If no station of the programme type you want can be found,
"NOT FOUND" will appear for 4 seconds.
If you have selected the traffic programme:
If you select traffic programme (TP) as the programme type
in step 5, to receive only radio stations which broadcast traf-
fic programmes, the TP will appear. (However, this does not
necessarily mean that you will hear any traffic announcements
at that time.)
When a traffic announcement is actually being made, the TA
will appear.
(When both the TP and TA appear, an announcement will be
made.)
24
00.1.13, 11:59 AM