Sound Control - Sharp MD-MX30H Operation Manual

SOUND CONTROL

Volume
(Main unit)
0
(Main unit operation)
When the VOLUME control is turned clockwise, the vol-
ume will increase. When it is turned anti-clockwise, the
volume will decrease.
(Remote control operation)
Press the VOLUME
the VOLUME button to decrease the volume.
Servo Powered Volume:
(Main unit)
The VOLUME control automatically comes out when the
power is turned on, and goes back when the unit is set to
the stand-by mode.
When the power is turned on, you can put the VOLUME
control in and out by pressing the VOLUME SELECT but-
ton.
Note:
Do not push in the VOLUME control forcibly with your fin-
ger.
Pre-programmed equalizer
(Main unit)
FLAT
SOFT
When the EQUALIZER button is pressed, the current
mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly.
FLAT: The sound is not modified.
HEAVY: Bass and treble are emphasised.
VOCAL: Vocals (midrange tones) are emphasised.
SOFT: Treble is reduced.
*07-10
(Remote control)
15 MAX
button to increase the volume and
(Remote control)
VOLUME
SELECT
(Remote control)
EQUALIZER
HEAVY
VOCAL
10
Extra bass (X-BASS)
(Main unit)
X-BASS
Press the X-BASS button to emphasise the bass region
of the frequency spectrum.
"X-BASS ON" will appear.
Press the X-BASS button again to cancel the extra bass
mode.
"X-BASS OFF" will appear.
Surround
(Main unit)
SURROUND
Press the SURROUND button to allow you to enjoy mu-
sic that seems to surround you.
"SURROUND" will appear.
Press the SURROUND button again to cancel the sur-
round mode.
"PASS" will appear.
10
00.1.13, 11:52 AM
(Remote control)
X-BASS
X-BASS
(Remote control)
SURROUND
SURROUND