Replacing The Roller Assembly Kit - Epson DS-860 User Manual

DS-860 User's Guide

Replacing the Roller Assembly Kit

You need to replace the parts on the Roller Assembly Kit after scanning every 200,000 times.
Note:
Make sure you replace all of the rollers at the same time.
Removal part
Roller Assembly Kit
To replace the Roller Assembly Kit, follow the steps below.
c
Important:
Do not touch the surface of the roller.
A
Turn off the scanner.
B
Unplug the AC adapter from the product.
C
Pull the cover open lever and open the scanner cover.
D
Press the hook on the right side of the pickup roller cover, and then open the cover.
Maintenance
Part number
B12B813581
41
Number of scanning
200,000