Table of Contents
Advertisement
Connection
Connecting to Monitor
Connect the Video Output jack to the VIDEO-IN jack of monitor.
• As the connecting method varies with the instruments, refer to the manual supplied with the instrument.
• If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.
• Only connect the cable when the power is turned off.
Connecting to Power
Connect the adaptor to the power input terminal as shown in the figure below.
The recommended adaptor specification for SCD-3080N/SCD-3080P is DC 12V / 500mA or AC
24V / 500mA.
For AC / DC power
• Since the power specification supports both AC
and DC, connect AC 24V, 500mA Adaptor or DC
12V, 500mA Adaptor.
When the resistance value of copper wire is at [20˚C(68˚F)]
Copper wire size (AWG)
Resistance (Ω/m)
Voltage Drop (V/m)
•
As shown in the table above, voltage decreases as the wire gets longer. Therefore use of
an excessively long adaptor output line for connection to the camera may affect the
performance of the camera.
* Standard voltage for camera operation : DC 12V ± 10%, AC 24V ±10%
* There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
CCTV Camera
2
#24(0.22mm
)
#22(0.33mm
0.078
0.050
0.028
0.018
14
COLOR DOME CAMERA
2
2
)
#20(0.52mm
)
0.030
0.011
SCD-3080
Monitor
---- Power Input
Terminal
2
#18(0.83mm
)
0.018
0.006
Hide quick links:
Advertisement
Table of Contents
