HIKVISION DS-8000HMFI Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. DVR
  5. DS-8000HMFI Series
  6. User manual
HIKVISION DS-8000HMFI Series User Manual

HIKVISION DS-8000HMFI Series User Manual

Mobile dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual of DS-8000HMFI Mobile DVR
DS-8000HMFI Series Mobile DVR
User Manual
Version 1.0
This manual,which may contain technical incorrectnesses due to printing,will be kept
updating aperiodically without notice,and softwares refered as well.
Page
Total
1
104

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-8000HMFI Series

Summary of Contents for HIKVISION DS-8000HMFI Series

  • Page 1 User Manual of DS-8000HMFI Mobile DVR DS-8000HMFI Series Mobile DVR User Manual Version 1.0 This manual,which may contain technical incorrectnesses due to printing,will be kept updating aperiodically without notice,and softwares refered as well. Page Total...

  • Page 2: Table Of Contents

    User Manual of DS-8000HMFI Mobile DVR Catalog 1 Production Description ......................4  1.1 Overview .......................... 4  1.2 Key features ........................4  2 Installation help ......................... 6  2.1 Check device and accessories..................... 6  2.2 Install HD ..........................6  2.3 Rear Panel Interface Description..................6  2.3.1 Rear Panel Description ..................
  • Page 3 User Manual of DS-8000HMFI Mobile DVR 5.2.4  Video Parameters Setup ................46  5.2.5  Mask Area Setup ..................48  5.2.6  Preview Properties ..................49  5.3 Alarm setup ........................51  5.3.1  External Alarm Input and Relay Output ............. 51  5.3.2  Motion Detection Alarm ................55  5.3.3 Video Loss Alarm ....................

  • Page 4: Production Description

    User Manual of DS-8000HMFI Mobile DVR 1 Production Description 1.1 Overview Embedded digital net recorder DS-8000HMFI,which is excellent and of the highest resolution 4CIF, is designed for vehicle surveillance.it combines the latest technology from fields IT, mechanism and electronics,such as,video and audio compression&decompression, recording of high capacity hard disk,TCP/IP,driving track monitoring,GPS,wireless,media playing,CAN bus interface and so on…….in addition, built-in application code in FLASH definitely makes it more stable.
  • Page 5 User Manual of DS-8000HMFI Mobile DVR Alarm Four ports input alarm,2 ports output alarm Choice of alarm types motion detected,mask,video loss and switch input. Alarm plan,various of feedbacks,alarm triggered presetted point,cruise or track. A series of alarm types,such as HD error and video format conflict Security Customizing authority for operators by the unique administrator.

  • Page 6: Installation Help

    User Manual of DS-8000HMFI Mobile DVR 2 Installation help Notice：operate with power off. 2.1 Check device and accessories. Please check carefully according to the list inside once you get it. 2.2 Install HD Tool Cross tip screwdriver. Steps 1.Open DVR cabinent 2.Fix HD by screwdriver.

  • Page 7: Rear Panel Description

    User Manual of DS-8000HMFI Mobile DVR 2.3.1 Rear Panel Description Interface Physical interface Connection description description RS-485 (T+ T- R+ R-) 485 interface for PTZ decoder, etc 8-pin bayonet catch with flange CAN (1H 1L 2H 2L) CAN bus interface ALARM IN (1 2 3 4) Alarm input interface 8-pin...

  • Page 8: Batteries And Ignition Switch Connection

    User Manual of DS-8000HMFI Mobile DVR interface 5-pin avigation Power in, connect to vehicle DC IN interface batteries output (24V/12V) 8-pin bayonet SENSOR IN (1 2 3 4 5 6 7 8) Vehicle driving record interface catch with flange 6-pin bayonet AUDIO OUT (+L - +R –...
  • Page 9 User Manual of DS-8000HMFI Mobile DVR (1) Cathode ignition switch Cathode ignition switch is connected to vehicle battery DC+12V/24V. Cathode ignition switch Load +12V/24V Battery (2) anode ignition switch Anode ignition switch is connected to vehicle battery GND. Anode ignition switch Load +12V/24V Battery...

  • Page 10: Alarm Output Connection Guide

    User Manual of DS-8000HMFI Mobile DVR Connect ignition switch with DVR“KEY-“. Connect DVR “DC IN –” and vehicle battery GND as the figure below. Anode ignition switch +12V/24V DC IN+ KEY+ DC IN- KEY- Battery After the ignition switch is on (vehicle starts), then the mobile DVR should also init. When the ignition switch is off, then the mobile DVR will automatically shut down after preset time period.
  • Page 11 User Manual of DS-8000HMFI Mobile DVR Connection Guide 1. Unplug the green plugs on device; 2. Use screw driver to loosen the screws, and put the signal wire into the bottom of reeds,then fasten the screws again; 3. Connnect the green plugs into the device again. Page Total...

  • Page 12: Operation Guide

    User Manual of DS-8000HMFI Mobile DVR 3 Operation Guide 3.1 Front Panel Description Note: Please refer to the product for actual interfaces. Status of Power channel 1 Status of READY Self-detect mode channel 2 Status of STATUS Other Status channel 3 Status of ALARM ALARM lamp...
  • Page 13 User Manual of DS-8000HMFI Mobile DVR receiving part. Index Name Description POWER Turnoff device. Enable/Disable IR remote control Same as numeric keys of front Numeric Keys panel. EDIT Same as EDIT key of front panel. Same as A key of front panel. Same as REC key of front panel.
  • Page 14 User Manual of DS-8000HMFI Mobile DVR Wether blocked during transmission Any Fluorescent nearby Note: Please contact your dealer if the IR controller cannot work properly after all the above issues have been excluded. Page Total...

  • Page 15: Menu Description

    User Manual of DS-8000HMFI Mobile DVR 3.3 Menu Description 3.3.1 Menu Items Menu Name Function Menu Name Function Camera name and position setup Video standard Adjust Brightness, Contrast, Hue Brightness and Saturation Menu transparency OSD Display mode, position and Unit name OSD format setup Device ID Mask area setup...

  • Page 16: Menu Operation

    User Manual of DS-8000HMFI Mobile DVR Restore parameters Upgrade firmware HDD management Line Clear alarm output Media player Utilities Movie Reboot Power off View log System information 3.3.2 Menu Operation How to enter into menu mode Press[MENU]key to enter into DVR main menu. Press[PLAY]short key to enter into playback menu.
  • Page 17 User Manual of DS-8000HMFI Mobile DVR Each menu contains different kinds of items. There is a small rectangular frame named “Active Frame” which is pointing to the selected item. This “Active Frame” can be moved by [ ]or[ ]keys. There are such kinds of menu items: Check Box: Provide 2 options, “...

  • Page 18: Character Input

    User Manual of DS-8000HMFI Mobile DVR 3.4 Character Input In the menu interface, if you enter into edit status (for example, in the “camera name” edit box), at the bottom of screen, the input status is appeared: Here it means you can press numeric keys to input digital number. Press[A]key to change input methods.

  • Page 19: Chapter4 Basic Operation Guide

    User Manual of DS-8000HMFI Mobile DVR Chapter4 Basic Operation Guide Notice: in this part, the user must have the operate rights, otherwise he can not do any operation. In this case, a dialoge will popup as bellow. 4.1 Power on Note: Please make sure the power supply matches DVR and AC cable connected correctly.
  • Page 20 User Manual of DS-8000HMFI Mobile DVR In the screen, it will display record and alarm status of each camera. These two kinds of status will switch over automatically. Press [A] key to display or hide the camera status bar. Camera record status is following: Icon Icon Color Status Description...
  • Page 21 User Manual of DS-8000HMFI Mobile DVR Camera alarm status is following: Icon Icon Color Status Description White Video signal lost Yellow View tampering alarm Pink Motion&External alarm Green No alarm Blue Motion alarm External alarm Press numeric keys to switch over individual camera preview. Press[EDIT]key of the IR controller to manual cycle preview.

  • Page 22: User Name And Password

    User Manual of DS-8000HMFI Mobile DVR User name and password Note: When DVR is delivered from factory, there is only one default administrator named “admin”, and password is “12345”. The administrator’s name can not be modified, while the password can be modified. The administrator can create 15 users and define their user rights.
  • Page 23 User Manual of DS-8000HMFI Mobile DVR Setp 2: Enter into password modification menu Move the “Active Frame” to “Password” icon by using[ ]/[ ]keys. Press[ENTER]key to enter into following password menu: Step 3: Input new password Press[EDIT]key to enter into edit box. You can use numeric keys to input new password. The password can be null.

  • Page 24: Ptz Control

    User Manual of DS-8000HMFI Mobile DVR Note: In edit box, use [ ]/[ ]to move cursor and[EDIT]key to delete the numeral in front of the cursor. Step 4: Modify password successfully Move the “Active Frame” to “Confirm” button, press[ENTER]key. If the password is modified successfully, you will get the main menu.

  • Page 25: Playback

    User Manual of DS-8000HMFI Mobile DVR Description Manual record interface has following parts: channel number, channel status, start/stop record, start all and stop all buttons. Channel: List the channel number that DVR has. Status: Channel work status has 4 cases: means idle.
  • Page 26 User Manual of DS-8000HMFI Mobile DVR In menu mode, press [PLAY] key, you can enter into “Playback” interface directly. One Channel Playback Description Channel: Use [↑] or [↓] key to select one channel. Rec Type: Use [↑] or [↓] to select recorded files type. The file type options have “All”, “All Time”, “Motion Detect”, “Alarm”...
  • Page 27 User Manual of DS-8000HMFI Mobile DVR File List Box: List the matched files. File started time, file size are displayed in the list box.You can use [↑] [↓] keys to move the scroll bar to select file. Backup Devices: You can select USB flash, USB HDD, USB CD-R/W or SATA device to backup the files or clips.
  • Page 28 User Manual of DS-8000HMFI Mobile DVR second channel (2-ch playback), record type, enable card No. search option (“ ”) and input the card number, move “Active Frame” to “Search” button, press [ENTER] key, DVR will search and list the matched files. If the matched files are more than 8, you can use numeric keys or [↑] [↓] keys to select page.

  • Page 29: Backup Recorded Files

    User Manual of DS-8000HMFI Mobile DVR Backup Recorded Files Note: The user must have “Playback” right. Please connect with backup devices first. Such as USB flash, USB HDD and SATA device. Steps of backup via the Esata port: 1. connect the SATA HDD to the eSATA PORT. 2.
  • Page 30 User Manual of DS-8000HMFI Mobile DVR In the playback interface, you can backup the recorded files. In the preview mode, press [PLAY] key, in the login dialog, select username and input the correct password, you can enter into the playback interface. In the menu mode, just press [PLAY] key, you can enter into playback interface directly.
  • Page 31 User Manual of DS-8000HMFI Mobile DVR Step 2: Select the files that you want to backup In the file list box, use[↑]or[↓]keys to move the scroll bar. When the scroll bar stays at the file you wan to backup, press[EDIT]key to select it. The symbol “ ” is the selection tag. You can use the same method to select other files you want to backup.

  • Page 32: Media File Import And Play

    User Manual of DS-8000HMFI Mobile DVR Playback the video segment You can use our file player software to playback the video segment in PC. You can find the player software in attached CD. 4.8 Media file import and play This devide support media play function, before you use the media play function, you need to import the media file which is prepared already into the DVR, the segment below will instroduce how to import and how to play the media file.

  • Page 33: Format The Media Player Hdd

    User Manual of DS-8000HMFI Mobile DVR 4.8.2 Format the media player HDD The media player HDD must connect to the forth SATA port. Set the SATA4 to “record&media play”. After the connection is finished, format the SATA4 in the “Hard Disk” interface. Show as below.
  • Page 34 User Manual of DS-8000HMFI Mobile DVR 1. Sequence play After the system power on, press the [ ] button in the preview interface, it will start with the get up prompt, play the movie in sequence, if there have advertisement file, the business advertisement will be played according to the interval (the interval can be set in the software “programe Editor”), after the business advertisement is over, the movie will be continue;...

  • Page 35: Chapter5 Parameters Setup Guide

    User Manual of DS-8000HMFI Mobile DVR Chapter5 Parameters Setup Guide Only the users that have “Parameters Setup” right need read this chapter. When the following parameters are modified and saved, you must reboot the DVR to make the new parameters take into effective. Other parameters do not need to reboot. Any network parameters Stream type, resolution and record schedule External alarm sensor type...
  • Page 36 User Manual of DS-8000HMFI Mobile DVR Move “Active Frame” to “User” icon, press [ENTER] key to enter into “User Management” menu. In the user name list box, only “admin” is existed. You can use[→]key, move “Active Frame” to password edit box, and press[EDIT]key to enter into edit status. Press numeric keys to input the new password.

  • Page 37: Add And Delete User

    User Manual of DS-8000HMFI Mobile DVR edit box, input the verify password. Move “Active Frame” to “Confirm” button, and press [ENTER], if password and verify password are the same, the password will be saved and taken into effective. If password and verify password are not same, a warning message box will be appeared. In this case, press [ENTER] to return password edit box, and input new password again.
  • Page 38 User Manual of DS-8000HMFI Mobile DVR Step 2: Add new user name In the “User Management” menu, move “Active Frame” to “Add” button and press [ENTER], in the pop-up dialog, input the new user name (refer to chapter 3.4), press [ENTER]and return “User Management”...
  • Page 39 User Manual of DS-8000HMFI Mobile DVR rights. The default rights include local playback, remote playback and view log. If you want to define the detail rights, move “Active Frame” to “Setup Rights” button and press[ENTER]to enter into rights setup menu as following: Operational rights are divided into “Local Rights”...

  • Page 40: Unit Name And Device Id

    User Manual of DS-8000HMFI Mobile DVR Log: Locally view the log on DVR; Utilities: Locally upgrade firmware, format HDD, reboot DVR and shut down DVR, etc. “Remote Rights”: PTZ Control: Remote control PTZ; Record: Remote manual start/stop recording; Playback: Remote playback, download the recorded files on DVR; Parameters Setup: Remote setup the DVR parameters;...
  • Page 41 User Manual of DS-8000HMFI Mobile DVR There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move “Active Frame” to unit name edit box, press[EDIT]key to enter into edit status, you can modify the unit name. About how to input characters, please refer to chapter 3.4. Press[ENTER]key to finish modification.

  • Page 42: Local Preview Setup

    User Manual of DS-8000HMFI Mobile DVR 5.2 Local preview Setup 5.2.1 Video output standard There is one VOUT BNC connector at the rear panel of DVR. It is used to connect with analog monitor and can support PAL or NTSC video output. You can modify video output standard to match video input.

  • Page 43: Osd Setup

    User Manual of DS-8000HMFI Mobile DVR 5.2.3 OSD Setup OSD is abbreviation of “On Screen Display”. For our embedded DVRDVS, it includes displaying system time and camera name. OSD settings include: System time, time format, time display position, camera name, camera name display position, etc.
  • Page 44 User Manual of DS-8000HMFI Mobile DVR Display mode: There are several display modes: Opaque&Steady, Transparent&Steady, Transparent&Flashing, Opaque&Flashing, Move “Active Frame” to “OSD” item, you can select one mode. Display position and format: Move “Active Frame” to “Position” button on the right side of “OSD”, press [ENTER]to enter into setup image, you can find there are 22*18 (for NTSC, 22*15) small panes, and OSD position is in red.
  • Page 45 User Manual of DS-8000HMFI Mobile DVR In “Image Setup” menu, you can define name for each camera. Please note that camera’s name can not be copied. The steps of camera name setup: Step 1: Select one camera. Step 2: Move “Active Frame” to camera name edit box, press[EDIT]key to enter into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4).

  • Page 46: Video Parameters Setup

    User Manual of DS-8000HMFI Mobile DVR save it. In the “Image Setup” menu, perss “Cancel” button or[ESC]key, you can abort the modification. 5.2.4 Video Parameters Setup For different camera and different background, in order to get the best video image, you need to adjust video parameters such as brightenss, saturation, contrast and hue, etc.
  • Page 47 User Manual of DS-8000HMFI Mobile DVR Page Total...

  • Page 48: Mask Area Setup

    User Manual of DS-8000HMFI Mobile DVR 5.2.5 Mask Area Setup In some cases, maybe you want mask the sensitive area. This area will not be preview and recorded. The mask area setup steps are following: Step 1: Enter into “Image Setup” menu: Step 2: Select one camera: You can use[ ][ ]keys to select one camera.

  • Page 49: Preview Properties

    User Manual of DS-8000HMFI Mobile DVR Step 4: Setup mask area: In the mask area setup interface, there is one small yellow pane on the upper left side. For PAL camera, the whole screen is divided into 22*18 panes (22*15 for NTSC), you can use[↑][↓][→][←]keys to move the yellow pane to your hope position and press[EDIT]key, the yellow pane will be turned into red, then you can use[↑][↓][→][←]keys to extend the red pane.
  • Page 50 User Manual of DS-8000HMFI Mobile DVR Step 2: Preview properties: Select Out: set the output image for each outpout port. Preview mode: For preview mode item, you can use[↑][↓]key to select one mode. If DVR has only 1 channel, you can select only “1 Screen” option. If DVR has 4 channels, there are “1 Screen”...

  • Page 51: Alarm Setup

    User Manual of DS-8000HMFI Mobile DVR After you define the camera perview order, you can select preview mode to meet your demand. Save setup: Press “Confirm” button to save preview properties. Press “Cancel” or [ESC]key to abort. 5.3 Alarm setup 5.3.1 External Alarm Input and Relay Output You can setup for each external alarm input.
  • Page 52 User Manual of DS-8000HMFI Mobile DVR you will enter into “Alarm in Handling” sub menu: Step 4: Alarm trigger record channel setup You can select channels to record for each alarm input. In the sub menu, you can use[ENTER]or[EDIT]key to enable record channel. “×” means disable and “ means enable.
  • Page 53 User Manual of DS-8000HMFI Mobile DVR Move “Active Frame” to “PTZ Linkage” button, press[ENTER]key to enter into “PTZ Linkage” setup menu: First select one camera, then select one of following PTZ linkage: Preset: Set the flag as “ ” to enable preset, in the preset number edit box and input one preset number that has been setup already.
  • Page 54 User Manual of DS-8000HMFI Mobile DVR Step 2: Select delay time The delay time is when the alarm is disappeared, the alarm output will continue output time. The delay time options are: 5 Seconds, 10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes, 10 Minutes and Manual Stop.

  • Page 55: Motion Detection Alarm

    User Manual of DS-8000HMFI Mobile DVR 5.3.2 Motion Detection Alarm If you enable this function, when there is motion detected, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use[ ][ ]key to select one camera. Step 3: Select motion detection sensitivity: On the right side of “Motion Det.
  • Page 56 User Manual of DS-8000HMFI Mobile DVR The whole screen is divided into 22*18 panes (NTSC: 22*15). There is one yellow panel on the upper left side. The motion area setup steps are the same as that of mask area setup (refer to chapter 5.7).
  • Page 57 User Manual of DS-8000HMFI Mobile DVR The motion detection area is displayed as following: Step 5: Motion alarm policy: Move “Active Frame” to the corresponding “Policy” button of motion detection alarm, press[ENTER]key to enter into “Motiomn Alarm Handle” menu: Step 6: Motion alarm record channel setup: When there is motion alarm happened, you can trigger related camera to start recording.

  • Page 58: Video Loss Alarm

    User Manual of DS-8000HMFI Mobile DVR Note: In order to make the cameras start recording, in “Recording” menu, you must enable recording schedule and set “Rec Type” as “Motion Detection” or “Motion | Alarm”. Please refer to chapter 5.12 for recording setup. Step 7: Motion alarm schedule: When the motion alarm is happened in schedule, DVR will response such as “On Screen Warning”, “Audible Warning”, “Upload to Center”...
  • Page 59 User Manual of DS-8000HMFI Mobile DVR Step 2: Select camera: Use[ ][ ]keys to select one camera. Step 3: Enter into “Video Signal Loss Handle” interface: Move “Active Frame” to the list box on the right side of “Video Loss” item, use[ ]key to select “Handle” option and move “Active Frame”...

  • Page 60: View Tampering Alarm

    User Manual of DS-8000HMFI Mobile DVR loss is happened in the schedule, DVR will response. Note: The 4 time periods can not be repeated. Please reboot DVR to make parameters into effective. Step 5: Setup alarm policy: You can select one or more response solutions, including “On Screen Warning”, “Audible Warning”, “Upload to Center”...
  • Page 61 User Manual of DS-8000HMFI Mobile DVR Step 4: View tampering area setup Move “Active Frame” to “Area” button, press [ENTER]key to enter into area setup interface. The setup methods are same as that of mask area setup. After setup the area, press[ENTER]key to return “Image Setup” menu. You can press[ESC]key to abort.

  • Page 62: Recording Setup

    User Manual of DS-8000HMFI Mobile DVR to step 8. In “Image Setup” menu, press “Confirm” key to save all cameras parameters. Press “Cancel” button or[ESC]key to abort. Select “Off” option for “View Tampering”, you can delete the view tampering area. Note: Only one view tampering area can be setup for each camera.
  • Page 63 User Manual of DS-8000HMFI Mobile DVR Stream Type: There are two options, one is “Audio&Video” stream and the other is “Video” stream only. If you want to record video and audio, please select “Audio&Video” option, otherwise you can select “Video” option to record only video. Note: If you change this option, please reboot DVR to make parameter into effective.

  • Page 64: Record Schedule Setup

    User Manual of DS-8000HMFI Mobile DVR bit rate. The lower bit rate, the longer PreRecord time is. If the bit rate (Max bit rate) is very low, and you select “PreRecord Time” as “5 Seconds”, maybe the actual perrecord time is more than 5 seconds. On the other side, if the bit rate is high, and set “PreRecord Time”...
  • Page 65 User Manual of DS-8000HMFI Mobile DVR Step 2: Select ond day and enable all day recording option For “Day” item, there are options: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday. Use[↑][↓]keys to select one day. Move “Active Frame” to the check box on the right side of “All Day”...

  • Page 66: Pre-Record And Post-Record Setup

    User Manual of DS-8000HMFI Mobile DVR Step 2: Select ond day and disable all day recording option For “Day” item, there are options: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday. Use[↑][↓]keys to select one day. Move “Active Frame” to the check box on the right side of “All Day”...
  • Page 67 User Manual of DS-8000HMFI Mobile DVR “Network” menu description: *NIC type: Defautl is “10M/100M Auto”, the other options are: 10M Half-Dup, 10M Full-Dup, 100M Half-Dup and 100M Full-Dup. *IP address: This IP address must not be conflict with other IP. If there is DHCP server in network, you can set the IP as “0.0.0.0”, save and reboot DVR.

  • Page 68: Ptz

    User Manual of DS-8000HMFI Mobile DVR Multicast IP: It is one D-class IP address, among 224.0.0.0 --- 239.255.255.255. If you do not use multicast function, you do not need to set. Some routers will prohibit multicast function in case of network storm. Remote Host IP and Port: If you set this IP and port, when there is alarm and exception happened, DVR will send information to that host IP.
  • Page 69 User Manual of DS-8000HMFI Mobile DVR PTZ menu description Select channel: Select one PTZ camera. RS-485 parameters: Including baudrate, data bit, stop bit, parity, flow control, etc. These parameters must be the same as those of PTZ. Protocol. PTZ address: Each PTZ has one different address. PTZ type: DVR had the following PTZ protocol: YouLi, LinLin-1016, LinLin-820, Pelco-p, DM DynaColor, HD600, JC-4116, Pelco-d WX, Pelco-D, VCOM VC-2000, NetStreamer, SAE/YAAN, Samsung, Kalatel-312, CELOTEX, TLPelco-p, TLHHX-2000, BBV, RM110,...
  • Page 70 User Manual of DS-8000HMFI Mobile DVR Sequence setup: Each sequence is made up of several curise points. Each cruise point includes one preset number, dwell time and dwell speed. Please make sure the PTZ you are using can support sequence function before you start to setup. You can save 16 sequnece. Cruise setup: Cruise is remembering the track of PTZ movement.
  • Page 71 User Manual of DS-8000HMFI Mobile DVR button to save all modification. Please make sure the PTZ you are using can support preset function. Sequence setup In “PTZ” menu, press “Setup” button on the right side of “Sequence No” item, you can enter into “Sequence”...
  • Page 72 User Manual of DS-8000HMFI Mobile DVR In “PTZ” menu, press “Setup” button on the right side of “Cruise” item, you can enter into “Cruise” setup menu: Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling PTZ with direction keys, press[ENTER]to save the operation track and return “Cruise”...
  • Page 73 User Manual of DS-8000HMFI Mobile DVR RS232 menu description RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc. Work mode: The RS-232 can be used as “Console”, “PPP” or “Transparent Channel”. Console: Connect with PC serial port. You can use HyperTerminal or NetTerm to control it. PPP: Connect Modem, using PSTN to transfer video image.
  • Page 74 User Manual of DS-8000HMFI Mobile DVR Username, password and Verify password: Only used when work mode is “PPP”. Used for login when remote PC dialup through PSTN. Phone: Only used when work mode is “PPP” and PPP mode is “Active”. It is the phone number of remote PC.
  • Page 75 User Manual of DS-8000HMFI Mobile DVR frame rate according to real conditions. Step 3: Save setup In “Recording” menu, press “Confirm” button to save parameters. Step 4: Setup Modem used on DVR side Use DCE calbe to connect Modem with PC serial port.
  • Page 76 User Manual of DS-8000HMFI Mobile DVR settings) in security option, press setup, set it in the popup dialogue box that is “Advanced Security Settings” as follows: Page Total...
  • Page 77 User Manual of DS-8000HMFI Mobile DVR Step 3: Establish the dialup connection Select the Modem connected with PC just like the dialup network connection, input the telephone number connected with DVR’s modem. Input the username, password. They must be the same as that DVR PPP setup. Step 4: During the dialup connection, it will give the message of “verification of username and password”, after successfully verification;...

  • Page 78: Exceptions

    User Manual of DS-8000HMFI Mobile DVR Exceptions The exceptions can be handled at present include: hard disk full, hard disk error, illegal access, IP address conflict, network failure, and NTSC/PAL differ. Enter into “Exceptions” menu: Including the following handle methods: Audible Warning: DVR beep warning.

  • Page 79: Chapter6 Utilities

    User Manual of DS-8000HMFI Mobile DVR Chapter6 Utilities There are many tools in “Utilities” menu. Including “SavePara”, “RestorePara”, “Upgrade”, “Hard Disk”, “Stop Alarm Out”, “Reboot”, “Power Off”, “View Log” and “System Info”. Enter into “Utilities” menu: Restore Parameters Restore factory parameters for DVR. The IP address, gateway and port number will not be restored.

  • Page 80: Upgrade

    User Manual of DS-8000HMFI Mobile DVR 6.2 Upgrade You can use this function to upgrade the firmware. Please confirm the language is matched. Press “Upgrade” icon, in the pop-up dialog, you can select either “FTP” or “USB” upgrade mode. If you select “FTP” mode, you will enter into “FTP Upgrade” menu: Input the ftp server IP and press[ENTER]key.

  • Page 81: Hard Disk Management

    User Manual of DS-8000HMFI Mobile DVR 6.3 Hard Disk Management Check HDD work status Capacity, Free space, Stand by or not, Normal status or not. Format HDD Before formatting stop all recording. After formatting, you must reboot DVR, otherwise DVR will not work normally. Clear Alarm Out Clear the alarm output manually.

  • Page 82: Vehicle Info

    User Manual of DS-8000HMFI Mobile DVR 6.7 Vehicle info It is used for recording the status of the bus, such as stop, warning, turn left, turn right, reverse, backdoor and so on. Here, the status are triggered by the high voltage or low voltage, it is according to the bus. “Speed limit”...
  • Page 83 User Manual of DS-8000HMFI Mobile DVR If you want to view the log based on default option, just press[ENTER]key. DVR will list all matched information. Also you can select options to search (By Type, By Date, By Type&Date). By Type To view log information of the assigned type.
  • Page 84 User Manual of DS-8000HMFI Mobile DVR of following options: All, External Alarm In, External Alarm Out, Motion Detect Start, Motion Detect Stop, View Tamper Start, View Tamper Stop . Step 3: Move “Active Frame” to “Search Log” button, press[ENTER]key to start searching. Step 4: When searching is finished, DVR will list all matched alarm information.
  • Page 85 User Manual of DS-8000HMFI Mobile DVR Step 6: Press “Return” button back to “Utilities” menu. Page Total...

  • Page 86: System Information

    User Manual of DS-8000HMFI Mobile DVR System Information Press “System Info” icon in “Utilities” menu, you can get DVR system information: Page Total...

  • Page 87: Chapter7 Firmware Upgrade

    User Manual of DS-8000HMFI Mobile DVR Chapter7 Firmware Upgrade The DVR firmware is stored in FLASH ROM. You can use DVR upgrade function to write the firmware file (digicap) into FLASH. There are two cases that you need to upgrade DVR firmware. One is update old firmware. The other is when the code in DVR FLASH is crashed.
  • Page 88 User Manual of DS-8000HMFI Mobile DVR Select “Users/rights” under “Security” menu item. The following dialog box will be pop-up. Create new user. Click “new user’. New user dialog pops up. Input user name “target”. Click “OK”. In the password dialog, input password “target” in “New Password” and “Verify Password”...
  • Page 89 User Manual of DS-8000HMFI Mobile DVR 7. Next time, you need not setup again, just double click and open “wftpd32.exe” to upgrade the DVR/DVS firmware. Page Total...

  • Page 90: Upgrade Mode

    User Manual of DS-8000HMFI Mobile DVR 7.2 Upgrade Mode Use client software to upgrade the firmware file. You do not need to use ftp server software. Please refer to the client software user manual for detail information. Use “FTP” function of “Upgrade” sub menu in “Utilities” menu. You need one host PC to run FTP server software and place firmware file (digicap), and make sure DVR and PC are in the same sub net.

  • Page 91: Appendix Ahdd Capacity Calculation

    User Manual of DS-8000HMFI Mobile DVR Appendix A HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity that is the capacity of each channel needed for every hour, unit Mbyte.

  • Page 92: Appendix Bdvr Connect Cable Definition

    User Manual of DS-8000HMFI Mobile DVR Appendix B DVR Connect Cable Definition RS-485 connect cable made method Material and tool One twist cable (8 pins), one standard RJ45 connector and one tool special for RJ45. RJ45 introduction Pin definition To make the connect cable according the follows. As to left point of RJ45 head, 1 and 2 cables are the anode and cathode line for sending, 3 and 4...

  • Page 93: Connect Cable Made Method

    User Manual of DS-8000HMFI Mobile DVR The corresponding relationship of the direct cable (2) Use the following method to make the cross network cable when DVR is directly connected with client-end PC. The corresponding relationship of cross cable RS-232 connect cable made method Material and tool One twisted cable (8 pins), one standard RJ45 head, one or more DB25 or DB9 plug-in, a tool for RJ45, one electric iron, and some soldering tin.
  • Page 94 User Manual of DS-8000HMFI Mobile DVR DVR output. Pin index Name Description Carrier Detect Receive Data Transfer Data Clear Data Request to Send Terminal Device Ready Ground Null — — According to demand, the following three situations are considered to make the serial port plug-in according to the corresponding relationship of the pin definition.
  • Page 95 User Manual of DS-8000HMFI Mobile DVR Connection for RJ45 and DB9 25-pin to 9-pin converter internal connection is defined as following: Connection for DB25 and DB9 (3) When the serial port of DVR is connected with DCE device (like MODEM), one end of the cable is 8-pin RJ45 plug-in, the other end is DB25 pin plug-in, the corresponding relationship is as following: Connection for RJ45 and DB25 (DCE)

  • Page 96: Appendix C Specifications

    User Manual of DS-8000HMFI Mobile DVR Appendix C Specifications H.264 Video compression PAL: 704*576(4CIF) NTSC: 704*480(4CIF) Preview resolution 4CIF/DCIF/2CIF/CIF/QCIF Compression resolution 1/2/3/4 channels TNC (1.0Vp-p, 75Ω) Video input 1 channel TNC (1.0Vp-p, 75Ω)) Composite video output PAL: 1/16—25 FPS; NTSC: 1/16—30 FPS Frame rate Video stream or Video&Audio stream Stream type...
  • Page 97 User Manual of DS-8000HMFI Mobile DVR Page Total...

  • Page 98: Appendix D Quick Search Function Table

    User Manual of DS-8000HMFI Mobile DVR Appendix D Quick Search Function Table Type Name Description Index User Create and delete users. System has one default management administrator. The administrator can create 15 Safety users and define their rights. function Password Modify password.
  • Page 99 User Manual of DS-8000HMFI Mobile DVR PTZ control Remote control PTZ. Remote Remote setup DVR parameters. setup Remote Remote record real time stream. record Remote Remote playback the recorded files in DVR playback Download Download recorded files in DVR. Remote Remote upgrade firmware.

  • Page 100: Appendix E Troubleshooting

    User Manual of DS-8000HMFI Mobile DVR Appendix E Troubleshooting Failure Possible reasons After plugging in power, turning on the power switch, Power cable is broken. “POWER” light in front Panel does not turn on, and fan Power supply is broken. does not work.
  • Page 101 User Manual of DS-8000HMFI Mobile DVR IP, port number, username or password, ect). Old player SDK (playm4.dll) Notes: Place the DVR in well ventilated space so that it operates within the allowed range of temperature and humidity as in specification. If the circuit board is wet, dust on circuit board can cause a short circuit.

  • Page 102: Appendix F Product Service

    User Manual of DS-8000HMFI Mobile DVR Appendix F Product Service Thank you for choosing our products. All of our products users can enjoy a conditional free repair guarantee service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for the damage caused by non personal acts).

  • Page 103: Appendix G Customer Information Card

    User Manual of DS-8000HMFI Mobile DVR Appendix G Customer Information Card User’s Name Mr./Mrs. Company Name Post Address Postcode Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distributor Page Total...
  • Page 104 User Manual of DS-8000HMFI Mobile DVR Suggestions: Page Total...

Table of Contents