Download Print this page



   Related Manuals for D-Link DAP-2695

   Summary of Contents for D-Link DAP-2695

  • Page 2: Package Contents

    • CD (with software and user manual) Note: Using a power supply with a different voltage than the one included with the DAP-2695 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.

  • Page 3: Hardware Overview

    LAN2 - Solid light when the Ethernet port is connected to a working port, such as a router or switch. The light will blink when there is traffic through LAN port. POWER - The light will blink during boot up. Once solid, the access point is ready. DAP-2695 Install Guide...

  • Page 4

    Console Port using a command line interface. LAN2 Port Connect to your network with an Ethernet cable. Connect to a Power over Ethernet (PoE) switch or LAN1 (PoE) Port router. Power Receptor Connect the supplied power adapter. DAP-2695 Install Guide...

  • Page 5

    Method 1 1. Connect one end of your Ethernet cable to the LAN1 (PoE) port on the access point. 2. Connect the other end into one port on a PoE switch or router. DAP-2695 Install Guide...

  • Page 6

    3. Use the supplied power adapter. Connect the power adapter to the Power In receptor on the PoE adapter. 4. Connect the power cable to the power adapter and then connect the other end into a power outlet. DAP-2695 Install Guide...

  • Page 7

    2. Use the supplied power adapter. Connect the power adapter to the Power receptor on the Access Point. 3. Connect the power cable to the power adapter and then connect the other end into a power outlet. DAP-2695 Install Guide...

  • Page 8

    Click Login to continue. Step 3: After the home page appears, go to Basic Settings > LAN to change the IP settings of the DAP-2695. Go to Basic Settings > Wireless to configure your wireless settings. Note: Make sure you click on Configuration > Save and Activate to save your settings.

  • Page 9

    Mounting Step 1: Insert the provided wall anchors in the wall where the mounting plate will be attached. Step 2: Use the provided screws to secure the mounting plate on the wall. DAP-2695 Install Guide...

  • Page 10

    Step 3: Attach the remaining screws securely to the back of the DAP-2695. Step 4: Attach the DAP-2695 to the mounting plate. DAP-2695 Install Guide...

  • Page 11

    Step 5: Slide the DAP-2695 down into the grooves on the mounting plate to secure it to the plate. DAP-2695 Install Guide...

  • Page 12: Technical Support

    Copyright ©2013 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. All references to speed are for comparison purposes only. Product specifications, size, and shape are subject...

  • Page 13: Fcc Statement

    FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 14

    IC Statement: CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

  • Page 15

    the radiator & your body. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

This manual also for:

Air premier dap-2695

Comments to this Manuals

Symbols: 0
Latest comments: