Static Pool Setting - D-Link DAP-2695 User Manual

D-Link DAP-2695 User Manual
The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific wireless
stations to receive a fixed IP without time control.
Function Enable/Disable: Dynamic Host Configuration Protocol (DHCP)
assigns IP addresses to wireless devices on
the network. This protocol simplifies network
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign IP addresses. Select
Enable to allow the DAP-2695 to function as a
DHCP server.
Assigned IP:
Use the Static Pool Settings to assign the same IP
address to a device every time you start up. The
IP addresses assigned in the Static Pool list must
NOT be in the same IP range as the Dynamic
Pool. After you have assigned a static IP address
to a device via its MAC address, click Apply; the
device will appear in the Assigned Static Pool at
the bottom of the screen. You can edit or delete
the device in this list.
Assigned MAC Address:
Enter the MAC address of the device requesting
association here.
Subnet Mask: Define the subnet mask of the IP address specified
in the "IP Assigned From" field.
Gateway:
Specify the Gateway address for the wireless network.
WINS:
Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
determines the IP address of a network computer with a dynamically assigned IP address, if applicable.
DNS:
Enter the DNS server address for your wireless network.
Domain Name:
Specify the domain name for the network.

Static Pool Setting

44