Wireless; Access Point Mode - D-Link DAP-2695 User Manual

D-Link DAP-2695 User Manual
On the wireless settings page, you can setup the basic wireless configuration for the access point. The user can choose from 4 different wireless
modes:
Access Point - Used to create a wireless LAN
WDS with AP - Used to connect multiple wireless networks while still functioning as a wireless access point
WDS - Used to connect multiple wireless networks
Wireless Client - Used when the access point needs to act as a wireless network adapter for an Ethernet enabled device
Select either 2.4 GHz or 5 GHz from the drop-down
Wireless Band:
menu.
Mode: Select Access Point from the drop-down menu.
Network Name (SSID): Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID's factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network. The SSID can be up to 32 characters and
is case-sensitive.
SSID Visibility: Select Enable to broadcast the SSID across the
network, thus making it visible to all network users.
Select Disable to hide the SSID from the network.
Auto Channel Selection: This feature when enabled automatically selects
the channel that provides the best wireless
performance. The channel selection process only
occurs when the AP is booting up. To manually
select a channel, set this option to Disable and
select a channel from the drop-down menu.

Wireless

Access Point Mode

12