Honda 08A03-5E1-001 Installation Instructions Manual page 8

In-dash CD changer with Cassette/MP3 player
After connecting, secure the connectors to the
rear of the in-dash CD changer with one wire tie
from in the in-dash CD changer kit.
AUDIO UNIT
AUDIO UNIT
BUS CABLE
14-PIN
CONNECTOR
BUS CABLE
18. Connect the vehicle connectors and antenna lead
to the audio unit. Insert the audio unit assembly
into the audio panel opening and reinstall it with
the four screws that you removed in step 6.
VEHICLE 20-PIN
CONNECTOR
ANTENNA
LEAD
AUDIO UNIT
AUDIO
BRACKET
CASSETTE/MP3
PLAYER OR IN-
DASH CD
CHANGER
SCREWS(4)
(reused.)
8 of 13
IN-DASH
CD CHANGER
CONNECTOR
WIRE TIE
IN-DASH
CD CHANGER
IN-DASH CD CHANGER
BUS CABLE
14-PIN CONNECTOR
5426061Y
VEHICLE 5-PIN
CONNECTOR
(2WD vehicle only.)
WIRE TIE
AUDIO
BRACKET
5426070Y
19. At the heater control opening, attach two EPT
sealers to the bus cable at the location shown.
With Cassette and MP3 Player:
BUS
CABLE
EPT
SEALER
AIR
DUCT
HEATER
CONTROL
UNIT
OPENING
VEHICLE 30-PIN
CONNECTOR
With In-dash CD Changer:
VEHICLE
HARNESS
HEATER
CONTROL
UNIT
OPENING
20. Secure the bus cable to the vehicle harness using
one wire tie.
All 30487-31491 (0511)
VEHICLE
HARNESS
WIRE TIE
BUS
CABLE
BUS
CABLE
WIRE TIE
EPT
SEALER
VEHICLE 30-PIN
BUS
CONNECTOR
CABLE
©
2005 American Honda Motor Co., Inc. - All Rights Reserved.
5715040Y
AIR
DUCT
5426202Y