Connecting the network cable
To make calls via VoIP, your phone must have Internet access. This connection is established
in the local network via a gateway.
You connect your phone to the same local network as the gateway. See the
in different scenarios
1
§§1§§
Attach one end of the Ethernet cable to the right-hand LAN port on the rear of the
phone.
§§2§§
Attach the other end of the Ethernet cable to a LAN port on your network Ether-
net switch or on the router itself.
Please exclusively use a shielded cable for the connection.
Warning
If you connect your Gigaset DE310 IP PRO to a PoE-capable Ethernet switch (PoE class
IEEE802.3af ), it will be supplied with power via PoE (Power over Ethernet). The PoE network
must not exceed the premises boundaries.
section on
page 8
for an overview of the different options.
2
First steps
Using the phone
13