Recording And Capturing Pictures Manually; Operating Ptz Control; Ptz Control Panel - HIKVISION DS-2CD2532F-I User Manual

User Manual of Network Camera

5.3 Recording and Capturing Pictures Manually

In the live view interface, click on the toolbar to capture the live pictures or
click to record the live view. The saving paths of the captured pictures and clips
can be set on the Configuration > Local Configuration page. To configure remote
scheduled recording, please refer to Section 7.2.
Note: The captured image will be saved as JPEG file or BMP file in your computer.

5.4 Operating PTZ Control

Purpose:
In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom
control of the camera.
Before you start:
To realize PTZ control, the camera connected to the network must support the PTZ
function or a pan/tilt unit has been installed to the camera. Please properly set the PTZ
parameters on RS-485 settings page referring to Section 10.8 RS-485 Settings.

5.4.1 PTZ Control Panel

On the live view page, click to show the PTZ control panel or click to
hide it.
Click the direction buttons to control the pan/tilt movements.
Figure 5-3 PTZ Control Panel
Click the zoom/iris/focus buttons to realize lens control.
Notes:
 There are 8 direction arrows ( , , ,
, , , , ) in the live view window
29