Configuring And Handling Alarms - HIKVISION DS-2CD2532F-I User Manual

Hikvision network camera user manual
Hide thumbs Also See for DS-2CD2532F-I:
Table of Contents

Advertisement

User Manual of Network Camera
Configuration > Advanced Configuration> Image > Picture Overlay
2. Click Browse to select a picture.
3. Click Upload to upload it.
4. Check Enable Picture Overlay checkbox to enable the function.
X Coordinate and Y Coordinate values are for the location of the picture on the image.
And the Picture width and height shows the size of the picture.

6.6 Configuring and Handling Alarms

This section explains how to configure the network camera to respond to alarm events,
including motion detection, video tampering, alarm input, alarm output, exception,
face detection, audio exception detection, intrusion detection, defocus detection, and
scene change detection, etc. These events can trigger the linkage methods, such as
Notify Surveillance Center, Send Email, Trigger Alarm Output, etc.
Notes:
 Check the checkbox of Notify Surveillance Center if you want to the alarm
information pushed to your mobile phone as soon as the alarm is triggered.
 Click
for help when you configure the intelligent functions, including face
detection, audio exception detection, intrusion detection, defocus detection,
scene change detection, etc. A help document will guide you to go through the
configuration steps.
Figure 6-33 Picture Overlay
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds-2cd2532f-iwDs-2cd2532f-is

Table of Contents