Setting / Calling A Preset - HIKVISION DS-2CD2532F-I User Manual

User Manual of Network Camera
when you click and drag the mouse in the relative positions.
 For the cameras which support lens movements only, the direction buttons are
invalid.
Icon

5.4.2 Setting / Calling a Preset

 Setting a Preset:
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click
Table 5-2 Descriptions of PTZ Control Panel
Description
Zoom in/out
Focus near/far
Iris +/-
Light on/off
Wiper on/off
One-touch focus
Initialize lens
Adjust speed of pan/tilt movements
Figure 5-4 Setting a Preset
to delete the preset.
30