Advertisement
Quick Links
OPERATION MANUAL
MODELS:
ME-10G
ME-15G
SPECIFICATIONS
INSTALLATION
MAINTENANCE TIPS
REPAIR PARTS LIST
GAS SPECIFICATIONS
MODEL NO.
ME-10G, ME-15G
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
THIS INSTALLATION MUST CONFORM WITH THE NATIONAL FUEL GAS CODE,
WARNING: IMPROPER INSTALLATION, ADJUSTMENT. ALTERATION, SERVICE
OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ
THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
43-05 20
NATURAL GAS
BTU/HR @ 3.5" W.C.
FOR YOUR SAFETY
ANSI Z223.1 (LATEST EDITION).
CECILWARE CORPORATION
TH
AVENUE, LONG ISLAND CITY, NY 11105-1295
• 718932-1414
AUTOMATIC GAS
WATER BOILER
12,000
PROPANE GAS
BTU/HR @ 10" W.C.
12,000
N795A 08/99 DS
Advertisement
Related Manuals for Cecilware ME-10G
Summary of Contents for Cecilware ME-10G
-
Page 1: Operation Manual
NATURAL GAS PROPANE GAS MODEL NO. BTU/HR @ 3.5" W.C. BTU/HR @ 10" W.C. ME-10G, ME-15G 12,000 12,000 FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. -
Page 2: If You Smell Gas
SAFETY PRECAUTIONS FOR YOUR SAFETY, THE FOLLOW SAFETY PRECAUTIONS SHOULD BE FOLLOWED AND ENFORCED. IF YOU SMELL GAS: • OPEN WINDOWS • DON'T TOUCH ELECTRICAL SWITCHES • EXTINGUISH OPEN FLAMES • IMMEDIATELY CALL YOUR GAS SUPPLIER 1. Instructions must be posted in a prominent location and all safety precautions taken in the event the user smells gas. - Page 3 Dimensions Water Shipping Wt. (inch) Model no. Capacity (Ib.) (Gallons) ME-10G 10.0 50.0 ME-15G 15.0 55.0 INSTALLATION AND OPERATING INSTRUCTION: PRE-INSTALLATION INSTRUCTIONS: The installation of your water boiler must be made by a licensed plumber and the installation must conform with State and Local Codes or in absence of Local Codes, with the National Fuel Gas Code ANSI Z223.1 a...
-
Page 4: Parts Illustration
ME-10/15G AUTOMATIC WATER BOILER PARTS ILLUSTRATION... - Page 5 PARTS LIST ME-10/15G DESCRIPTION ME-10G ME-15G KNOB M027A M027A COVER Q102H Q102H BODY R477A R478A GAUGE SHIELD MTG BRACKET U160A U160A VENT CAP ASSEMBLY X046A X046A GAUGE SHIELD WASHER KIT X012A X012A WATER GAUGE GLASS X043A X073A WATER GAUGE SHIELD...
- Page 6 CLEARANCES: Your water boiler is design certified to use on combustible floors. The side and back clearances for combustible constructions are as follows: 6 inches from side and 8 inches from back. The water boiler must be installed with 4 inch high legs provided.
- Page 7 RELIGHTING: Shut off all gas and wait approximately 3 minutes before relighting the pilot. SHUTTING DOWN: For temporary shut down, turn the thermostat to lowest or OFF position; then turn gas cock dial to PILOT position. To shut boiler down completely, partially depress and turn gas cock dial to OFF position.
- Page 8 BURNER REMOVAL: The burner can be removed with the unit standing in operating position. Turn off the gas flow to the unit. Allow the burner to cool off. Remove the wing nut holding the burner to the frame. Pull down the free burner end, enough to clear the threaded stud and pull the burner horizontally away from the manifold orifice.