OPERATION MANUAL
Contents
Specifications
Installation
Maintenance Tips
Repair Parts List
Wiring Diagrams
ELECTRICAL SPECIFICATIONS
VOLTS
MODEL No.
120
ME-10E
240
ME-15E
208
ME-30E
240
208
NOTE: FIELD WIRING MUST BE SUITABLE FOR 75 DEGREES CELCIUS.
USE COPPER WIRE ONLY FOR POWER SUPPLY CONNECTION.
COPPER WIRE: 14 AWG MINIMUM COPPER ONLY.
Every Cecilware product has been carefully inspected before shipment. The finest of materials and the highest
standards of workmanship have been but into the equipment.
Within 1 year of purchase, should any Cecilware product show defect in factory workmanship or material, we agree to
Repair, at our option or replace without cost to user such parts which prove upon factory inspection to have been so
defective. All equipment must be shipped transportation charges prepaid for acceptance. This warranty covers
replacement parts only, labor charges are covered for 90 days after installation.
This warranty does not apply under the following conditions:
• neglect or abuse of equipment
• excessive lime condition
• Improper installation
• any outside modification to equipment
Every Cecilware urn body is covered for three years. This warranty covers the stainless steel body and stainless steel
liners only.
Portable equipment such as Electric Fryers, Food Warmers, Electric Stoves, Dispensers, Plug-In Urns, Coffee
Brewers and Warmers must be returned to the factory or brought to an authorized service station for repair.
UNPACKING INSTRUCTION: Carefully unpack the water boiler and inspect immediately for
shipping damages. Your automatic water boiler was shipped in a carton designed to give maximum
protection in normal handling. It was thoroughly inspected before leaving the factory and the carrier
accepted and signed for it. File any claims for shipping damage or irregularities directly with the
carrier.
CECILWARE CORPORATION
43-05 20th AVENUE, LONG ISLAND CITY, N.Y. 11105 • 718-932-1414 • FAX 718-932-7860
AUTOMATIC
HOT WATER BOILER
MODEL No.
ME-10E
ME-15E
ME-30E
WATTS
AMPS
1,800
15.0
7,000
29.2
5,300
25.5
10,500
25.0
7,900
22.0
WARRANTY
FIELD
PHASE
WIRING SIZE
1
14AWG
1
10AWG
1
10AWG
3
10AWG
3
10AWG
N796A-10/98