TP-Link TL-WR710N User Manual page 32

These fields are case sensitive. If you have difficulty with this process, please contact
your ISP.
Dynamic IP/Static IP - Select Static IP if IP address, subnet mask, gateway and DNS
server address have been provided by your ISP. Otherwise, please select Dynamic IP.
Server IP Address/Name - Enter server IP address or domain name provided by your
ISP.
3. Then, the Wireless page will appear as shown in Figure 3-12 . Set the wireless parameters. It
is recommended that you rename an SSID, choose a Security Type and enter a Password.
Then click Next.
Wireless Radio - Enable or disable the wireless radio choosing from the pull-down list.
Wireless Network Name - Enter a string of up to 32 characters. The same name of
SSID (Service Set Identification) must be assigned to all wireless devices in your
network. The default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last
unique six numbers of each Router's MAC address). But it is recommended strongly
that you change your networks name (SSID) to a different value. This value is
case-sensitive. For example, TEST is NOT the same as test.
Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the Router can be used. It may be illegal to use the wireless
function of the Router in a region other than one of those specified in this field. If your
TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater
Figure 3-12 Quick Setup - Wireless
- 17 -