Client Mode - TP-Link TL-WR710N User Manual

3.2.4 Client Mode

When you choose Client on Working Mode page in Figure 3-5 , take the following steps:
1. Click Next in Figure 3-5, and then Wireless Client page will appear as shown in Figure 3-21.
Wireless Name of Root AP - Enter the SSID that you want to access.
MAC Address of Root AP - Enter the MAC address of AP that you want to access.
Survey - Click this button, you can survey the AP which runs in the environment.
Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the Router can be used. It may be illegal to use the wireless
function of the Router in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.
TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater
Figure 3-20 Quick Setup - Finish
Figure 3-21 Quick Setup - Wireless
- 23 -