TP-Link TL-WR710N User Manual page 37

WDS Mode - This field determines which WDS Mode will be used. It is not necessary to
change the WDS Mode unless you notice network communication problems with root
AP. If you select Auto, then Router will choose the appropriate WDS Mode
automatically.
Wireless Security Mode - This option should be chosen according to the security
configuration of the AP you want to access. It is recommended that the security type is
the same as your AP's security type.
Wireless Password - If the AP your router is going to connect need password, you
need to fill the password in this blank.
2. Click Survey button on the Wireless page as shown in Figure 3-18, and then AP List page will
appear as shown in Figure 3-19. Find the SSID of the Access Point you want to access, and
click Connect in the corresponding row. For example, the third item is selected. The target
network's SSID will be automatically filled into the corresponding box which is shown as the
Figure 3-18.
Note:
If you know the SSID of the desired AP, you can also input it into the field "SSID" manually.
3. Click the Next button in Figure 3-18. You will then see the Finish page.
Because something has changed on the Wireless Repeater page, you will see the Finish
page as shown in Figure 3-20. Click the Reboot button to make your wireless configuration
take effect and finish the Quick Setup.
TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater
Figure 3-19 AP List
- 22 -