Using A Midi Pedal To Switch Rigs; Rig Button; Quick Button - Kemper Profiling Amplifier Manual

34 KEMPER PROFILING AMPLIFIER

Using a MIDI pedal to switch rigs

You can assign a unique MIDI program change number to each rig (up to a maximum 128 rigs). To do so,
select a rig in Browse mode and press the SYSTEM button. Navigate to the "MIDI Settings" page and lo-
cate the "PrgChg Settings" soft button. Press this to see a list of all available assignments.

Rig button

This button is used to access rig-related parameters that are not covered elsewhere on the front panel, for
example "Tempo".

Quick button

The QUICK button calls up a user-selectable page in an instant.