Stack Section; Amplifier Module - Kemper Profiling Amplifier Manual

Stack section

This is your "amplifier stack" consisting of your amplifier profile, speaker cabinet profile, and EQ. Pressing
the STACK button and holding it for a short moment will enter the stack edit mode. You can rename the
stack using soft button "Rename" or browse through the available stacks using the BROWSE knob.

Amplifier module

Hold the AMPLIFIER button to display the amplifier settings.
Definition
♦
This parameter determines the way the preamp distorts when overdriven. Every guitar amp produces a dif-
ferent kind of distortion. The "Definition" parameter controls the characteristic fingerprint of the preamp.
The profiling process automatically sets "Definition" to the position that best represents the reference
amp.
Settings on the left of the parameter range
Settings in the middle
Settings at the right
As you can see, by tweaking "Definition", you can change the preamp distortion characteristic completely.
So you could, for example, use this control to modernize the profile of a vintage amp without having to
use additional stomps. Alternatively, start with a profile of a modern tube amp and use "Definition" to give
it a more vintage sound, when driven.
You can also use "Definition" to align the sound of your guitar to the sound of your amp, if required. Don't
be afraid to experiment until you get the balance that sounds best to you.
of the parameter range
of the parameter range
Woody, muted, bluesy, or earthy textures with a
limited dynamic range.
Fat and creamy textures with a greater dynamic
range.
Sparkling, brilliant, interactive and boutique.
USING THE TUNER 27