Kemper Profiling Amplifier Manual page 26

26 KEMPER PROFILING AMPLIFIER
Building a rig
If you have ever used a digital guitar processor before, you will know that building your own rigs is part of
the fun! In the KPA you will find it surprisingly easy, as well. Simply bring any module or section into focus,
activate it, and select from a range of presets using the BROWSE knob. Tweak to your liking, add spices if
necessary. To help get you started, here is a brief overview of the available modules:
Stomp section
This is a mono section. It includes all the built-in stomp box simulations that you can place before (pre-)
your virtual amplifier stack. An idle stomp slot can be activated by pressing and holding the corresponding
Stomp A/B/C/D button. Once in focus, the soft button "Enable" recalls the default Wah algorithm. Alterna-
tively, use the Type knob to browse through all available stomp algorithms. Selecting an option will recall
the stomp and close the list browser.
Stomp Types
♦
There are several types of stomp boxes available in the stomp section, such as various Wah effects rang-
ing from bandpass to comb filters. There are also several distortion stomps available, which were modeled
after famous vintage pedals. On top of all this, modulation stomps such as Vintage Chorus, Hyper Chorus,
Vibrato, Air Chorus, Flanger, Phaser, Tremolo and Rotary Speaker are included.
Most stomp parameters are self-explanatory, and a detailed overview of all available stomp parameters can
be found in the Reference Manual.