Handlebar Support Post Assembly; Handlebar Assembly - LifeSpan TR-1000SL Owner's Manual

Handlebar Support Post Assembly

1. Remove screw L , washer M and nut N from both right/left sides of base frame.
2. Stand up the support post and handle bar. (FIG-1 )
3. Attach screw L , washer
and tighten the screws.
4. Attach right base cover on base frame and tighten by screw R . Repeat the same
step on the left side.

Handlebar Assembly

1. Adjust the handlebars so they are positioned on the handlebar posts. Secure the right/left
handle bar on the support post by tightening the screws
2. Rotate the console tube so the console bracket is positioned as shown in Figure 4.
M and nut N back to both right/left sides of base frame
8
O . ( FIG-4 )