Code 128 Function Code Transmit; Telepen; Telepen Output - Hand Held Products 2020 User Manual

Code 128 Function Code Transmit

By default, Code 128 function codes are not transmitted with Code 128 barcode
data. However, if you wish to transmit Code 128 function codes with the barcode
data, scan the Function Codes On barcode, below.
* Function Codes Off
Function Codes On

Telepen

<Default All Telepen Settings>
Telepen
On
* Off

Telepen Output

Using AIM Telepen Output, the image scanner reads symbols with start/stop
pattern 1 and decodes them as standard full ASCII (start/stop pattern 1). When
Original Telepen Output is selected, the image scanner reads symbols with start/
stop pattern 1 and decodes them as compressed numeric with optional full ASCII
(start/stop pattern 2). Default = AIM Telepen Output.
* AIM Telepen Output
Original Telepen Output
2020/3820 User's Guide 6 - 17