Operating Range; Operating In Dehumidifying Mode; Setting Remote Control Clock; Power Supply - DeLonghi Pinguino CF 210 Use And Maintenance Manual

Hide thumbs Also See for Pinguino CF 210:
Table of Contents

Advertisement

SETTING THE REMOTE CONTROL CLOCK
Remove the cover of the battery compartment on the back of the remote control unit.
After inserting two 1.5 V alkaline batteries in the compartment, the clock is automatically set at 12:00. If you want to
set the time to 10:30, proceed as follows:
CLK
ACL
Note: the RST button (reset) in the battery compartment cancels all the settings on the remote control
unit (once pressed, the current time must be re-set).
Important: make sure you do not reverse the poles of the batteries.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-
cadmium )batteries. Do not dispose of batteries in fire. Batteries may explode or leak.

OPERATING RANGE

The operating range of the air conditioning
unit goes from a minimum of +17°C (63°F) to a
maximum of +35°C (95°F), with a choice of
temperatures in cooling mode of from +17°C
(63°F) to + 31°C (88°F).
In dehumidifying mode, the operating range
goes from +20°C (68°F) to + 31°C (88°F). The
temperature cannot be selected in advance.

POWER SUPPLY

• Plug the air conditioning unit into a suita-
ble outlet. Do not connect to multiple
sockets.
• Once plugged into the outlet, wait about
two seconds until you hear a beep, then
press the "
" button to turn the applian-
ce on.

OPERATING IN AIR CONDITIONING MODE

1. Make sure the condensation tank is cor-
rectly in place.
2. Press the "MODE" button repeatedly until
the air conditioning mode is selected.
"COOL" appears on the display.
O p e ra t i o n
Press the CLK button (in the battery compart-
ment) with a pointed object such as a pencil.
1
The time indicator on the display flashes and the
correct time can be set.
Press the HOUR button on the remote control unit
2
to set the hours (set to 10 am).
Press the MIN button on the remote control unit
3
to set the minutes (set to 30).
Press the CLK button again to confirm the opera-
4
tion, then replace the battery compartment
cover.
3. Press the "SET TEMP" button to set a suita-
4. Press the FAN SPEED button to select a sui-

OPERATING IN DEHUMIDIFYING MODE

1. Keep the windows and door closed to
2. Make sure the condensation tank is cor-
3. Repeatedly press the "MODE" button to
4. Neither the fan speed nor temperature
5. Do not use the exhaust hose to expel the
While the unit is operating in air conditio-
ning mode, always place the exhaust
hose through an open window to eject
the hot air from the room.
ble room temperature between +17°C
(63°F) and +31°C (88°F).
table fan speed: Max, Med, Min.
make dehumidification of the room more
efficient.
rectly in place.
select the dehumidifying mode. "DRY"
appears on the display.
can be regulated.
air outside. The hot air given out at the
back of the appliance should not be
expelled from the room.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents