Advanced Schedule Settings; Setting The Schedule - Tekmar 510 User Brochure

Advanced Schedule Settings

Schedule Mode
The schedule allows for either 2 or 4 temperature changes per day. These changes
are called 'events'.
To select the schedule mode:
Press Menu button to select
1.
Press Item button to display
2.
Press the
3.
• NONE - no schedule will be used
• - 2 events can be programmed (Occ and UnOcc)
• - 4 events can be programmed (Occ, UnOcc, Sleep, Wake)
Cycle Period
The cycle period can be changed to either 24 hour or 7 day.
To select the cycle period:
Press Menu button to select
1.
Press the Item button to display
2.
Press the
3.
• 24hr - All days have the same schedule.
• 7day - Each day of the week has its own individual schedule.

Setting the Schedule

To set the schedule:
1. Use the Menu button to select
2. Use the Item button to select the first event of the schedule.
3. Use the or
• If you wish to skip the event, select "– –:– –" as the time. "– –:– –"
is found between 11:50 PM and 12:00 AM.
4. Use the Item button to advance to the next available event.
5. Repeat steps 3 and 4 for each available event.
Sleep
62°F
Schedule operation with 4 events and suggested start times
or buttons to select schedule mode.
or buttons to select the desired schedule cycle.
button to set the start time of the event.
Wake
70°F
6:00 AM 8:00 AM
.
.
.
.
.
Occ. (Evening)
70°F
60°F
UnOcc. (Day)
6:00 PM
9 of 12
Sleep
62°F
10:00 PM
© 2009 U 510 - 09/09