Hard Drive Installation; Opening The Dvse; Identifying The Components - GE Interlogix Kalatel DVSe Installation And User Manual

2 Hard Drive Installation

This section contains important information on adding or replacing the internal
Disk Drives. Please read the entire section before performing any work.
Caution: Do not allow any metal object to contact the
motherboard. Do not allow loose screws to become lost inside
the DVSe chassis. Wear an Electro Static Discharge protection
device any time work is being performed inside the unit.

2.1 Opening The DVSe

Before removing the cover, turn off the unit and unplug it. Using a Phillips-head
screwdriver, carefully remove the twelve screws fastening the lid to the chassis.
Save the screws and use them to refasten the lid when finished.

2.2 Identifying The Components

Complete Internal Overview
Drive Support Bracket
0150-0178F
Mother
Board
Disk Drives
9
Power
Supply
Kalatel DVSe