Table of Contents
Advertisement
Auto Delete Mode
Auto Delete Mode, select yes or no. Default
setting is no. Auto Delete Mode
automatically invalidates data that is over 30
days old.
NOTE
Obtain the required network addresses from you Network
Administrator.
NOTE
The DVSe will automatically reboot if any of the Bus or Network
parameters are changed.
IP Address
Enter the assigned IP address by using the
left/right arrows to select the field and the
up/down arrows to change the values.
Subnet Mask
Enter the assigned Subnet Mask address by
using the left/right arrows to select the field
and the up/down arrows to change the
values.
Default Gateway
Enter the assigned Default Gateway address
by using the left/right arrows to select the
field and the up/down arrows to change the
values.
Date/Time
Enter the current date and time by using the
left/right arrows to select the field and the
up/down arrows to change the values.
Required only when Auto Delete Mode is set
to yes.
0150-0178F
15
Kalatel DVSe
Advertisement
Table of Contents
