Table of Contents
Advertisement
1 Introduction
1.1 Product Description
The DVSe is a rack mountable ethernet-ready high capacity digital video storage
system. From 1 to 8 hard drives can be installed in each DVSe chassis. The
unit may be purchased with or without hard drives installed.
1.2 Unpacking
Check the package and contents for visible damage. If any components are
damaged or missing, do not attempt to use the unit. Contact the supplier
immediately. If the unit must be returned, it must be shipped in the original
packaging.
Package Contents
•
The DVSe.
•
US & EU Power Cables.
•
The Kalatel DVSe Installation and Users Manual.
•
The Kalatel DVSe Release Note.
•
The Archiving Addendum Manual.
•
WaveReader Software and Manual.
•
WaveWatch Software and Manual.
•
IDE Hard Drive Power Connectors x 2. (If shipped without drives installed)
•
IDE Hard Drive Connection Ribbon x 4. (If shipped without drives installed)
•
Hard Drive Fastening Screws x 24. (If shipped without drives installed)
•
SCSI Cable, 50 HD to 50 HD.
•
IEEE 1394 Firewire Cable.
1.3 Installation Environment
Power: Ensure that the site's AC power is stable and within the rated voltage of
the external power supply. Ensure that a reliable Earthing path is maintained.
This unit is designed to be connected to earth ground. If the site's AC power is
likely to have spikes or dips, use power line conditioning or an Uninterruptable
Power Supply. Do not overload the circuit.
Ventilation: Ensure that the location is well ventilated. Do not obstruct the
cooling vents or fans.
Temperature: Observe the unit's ambient temperature specifications when
choosing a location for the unit. Extremes of heat or cold beyond the specified
operating temperature limits may cause the unit to fail. Do not install this unit on
top of other hot equipment.
Moisture: Do not expose the unit to rain or moisture. Moisture can damage
internal components. Do not install this unit near sources of water.
Kalatel DVSe
4
0150-0178F
Advertisement
Table of Contents
